Description
Planer Jet JWP-208-3 is an excellent option for professional use. Used in small workshops and industrial workshops. The machine is equipped with an engine with a capacity of more than five kilowatts. All main components are made of cast iron: planer module, base of guide columns and work table. This results in a high quality cut. An indirect but important advantage is the low noise level during operation.
Specifications thicknessing machine Jet JWP-208-3
- Type of machine thicknesser
- chain transmission
- Cutterhead diameter (mm) 81
- The speed of movement of the thickness gauge. (m/min) 10
- The thickness of the workpiece planer. Max. (mm) 200
- Voltage (V) 380
- Processing width, max. (mm) 500
- Depth of planing planing thickness. Max. (mm) 5
- Planing depth (mm) 5
- Number of knives (pcs) 4
- Power consumption (W) 5500
- Planer shaft speed (rpm) 5000
- Suction hole diameter (mm) 127
- Blade size (mm) 510x25x3
- Weight (kg) 300
- Dimensions (mm) 660x930x1050
Equipment
- Set of knives (installed on the shaft);
- Front and rear roller table extensions;
- Stand for floor installation;
- Package.
Features of JET JWP-208-3
Machine control is equipped with a minimum set of buttons. The rotating flywheel provides smooth adjustment of the planing of the workpiece in height. Switching between speeds (feeding workpieces) does not take much time: just change the position of the special handle. For convenient feeding of workpieces, the thicknesser table is equipped with movable rollers. The ideally polished surface of the table contributes to the smooth sliding of the workpiece during the planing process and, as a result, an accurate work result. For convenient movement of the machine on the working platform, the design provides for the presence of special handles. The base has holes for rigid attachment of the model to the floor, which can significantly reduce the level of vibration when working with large parts.
Lower rollers are mounted on the surface of the working table to facilitate the feeding of the workpiece. They are mounted on eccentric axles, which allows simple, quick and precise adjustment of their height of departure. Two rollers are mounted on the upper part of the machine for the return feed of the processed workpiece.
Despite the importance of the above design features, the decisive factor in favor of choosing this model for many is the ability to replace the standard four-knife shaft with a helical shaft. This modernization allows you to improve the quality of processing parts and, at the same time, forget about problems with knives for a long time, even when processing mainly hardwoods.
PECULIARITIES:
- Thickness table with rollers
- Cast iron body
Characteristics
| Power consumption, kW | 5,5 |
| Voltage, V | 400 |
| Consumed (output) power of the main engine, kW | 5,5 (3,8) |
| Cutterhead speed | 5000 rpm |
| cutterhead diameter | 81 mm |
| Blade size (LxWxT) | 510 x 25 x 3mm |
| Number of knives | 4 |
| Workpiece feed rate | 7 and 10 m/min |
| Maximum workpiece width, mm | 500 |
| Maximum workpiece height, mm | 200 |
| Maximum planing depth in one pass | 5.0 mm |
| Maximum permissible depth of planing in one pass over the entire width | 2.0mm |
| Minimum workpiece length, mm | 170 |
| Thickness table length (with extensions) | 654 (1470) mm |
| Exhaust outlet diameter, mm | 127 |
| Length, mm | 660 |
| Width, mm | 930 |
| Height, mm | 1050 |
| Weight, kg | 300 |
| Packed length, cm | 97 |
| Packed height, cm | 115,5 |
| Packed weight, kg | 359 |
PECULIARITIES:
- Possibility of installing a helical cutterhead
- 2-stage feed rate adjustment
- Thickness table with rollers
- Planing height adjustment by rotating handwheel
- Gear table height adjustment
- Removable roller infeed and outfeed tables
- Cast iron body
Jet JWP-208-3 is a powerful and productive professional class planer for private workshops with large volumes of work and for mass production at industrial enterprises. Massive (300 kg), stable and rigid design has a standard layout for medium-sized machines: a planer unit with a motor and a feed mechanism is fixedly fixed. To adjust the clearance and, accordingly, the thickness of the layer to be removed, the table moves along four columns. "Lift" is produced by rotating the handwheel with a handle, after adjustment, the position is locked with screw clamps. On the top side of the motor module there are rollers for the return feed of the workpiece. The rollers in the table surface, which reduce the friction of the workpiece, are mounted on eccentric axles for easy and convenient adjustment of the protrusion above its level.
Powerful (more than 5 kilowatts) motor, high rigidity and a four-blade cutterhead provide clean, confident and productive work in any breed. Compared to lighter models, this machine is relatively quiet.
The workpiece is fed by shafts different type: the first is metal with notches (“ribbon”), the second is smooth rubber. Drive mechanism with two gears for speed selection (7 or 10 m/min).
The machine can be equipped with a helical shaft. With it, the quality of planing is higher, and maintenance and operation are easier: there is no need for sharpening and adjusting knives, noise and vibrations are significantly reduced, areas of wood with knots and the reverse direction of the fibers are processed without defects.
Equipment
- Knife set (mounted on the shaft)
- Front and rear roller table extensions
- Stand for floor installation
Jet JWP-208-3 is a professional thickness gauge suitable for small workshops and industrial workshops. The machine is equipped with an engine with a capacity of more than five kilowatts. All main components are made of cast iron: planer module, base of guide columns and work table. This results in a high quality cut. An indirect but important advantage is the low noise level during operation.
Lower rollers are mounted on the surface of the working table to facilitate the feeding of the workpiece. They are mounted on eccentric axles, which allows simple, quick and precise adjustment of their height of departure. Two rollers are mounted on the upper part of the machine for the return feed of the processed workpiece.
Despite the importance of the design features noted above, the decisive factor in favor of choosing this model for many is the ability to replace the standard four-knife shaft with a helical shaft. This modernization allows you to improve the quality of processing parts and, at the same time, forget about problems with knives for a long time, even when processing mainly hardwoods.
Features JET JWP-208-3
- Possibility of installing a helical cutterhead
- 2-stage feed rate adjustment
- Thickness table with rollers
- Planing height adjustment by rotating handwheel
- Gear table height adjustment
- Removable roller infeed and outfeed tables
- Cast iron body
Delivery set JET JWP-208-3
- Knife set (mounted on the shaft)
- Front and rear roller table extensions
- Curbstone stand for floor installation.
Specifications JWP-208-3 |
|
|---|---|
| Characteristic | Meaning |
| Power consumption (output) | 5.5 (3.8) kW |
| Cutterhead speed | 5000 rpm |
| cutterhead diameter | 81 mm |
| Blade size (LxWxT) | 510 x 25 x 3mm |
| Number of knives | 4 |
| Feed rate | 7 and 10 m/min |
| Maximum workpiece width | 500 mm |
| Maximum workpiece height | 200 mm |
| Maximum planing depth in one pass | 5.0 mm |
| Maximum permissible depth of planing in one pass across the entire width | 2.0mm |
| Minimum workpiece length | 170 mm |
| Thickness table length (with extensions) | 654 (1470) mm |
| Exhaust port diameter | 127 mm |
| Dimensions (LxWxH) | 660 x 930 x 1050 mm |
| The weight | |
Planer thicknesser JWP-208-3 JET (Jet)
Jet JWP-208-3 is a powerful and productive professional-class planer for private workshops with large volumes of work and for in-line production in industrial enterprises.. This information is copied from the page: http://www.vseinstrumenti.ru/stanki/reysmusno-fugovalnye/jet/jwp-208/
Massive (300 kg), stable and rigid design has a standard layout for medium-sized machines: a planer unit with a motor and a feed mechanism is fixedly fixed.
To adjust the clearance and, accordingly, the thickness of the layer to be removed, the table moves along four columns.
"Lift" is produced by rotating the handwheel with a handle, after adjustment, the position is locked with screw clamps.
On the top side of the motor module there are rollers for the return feed of the workpiece.
The rollers in the table surface, which reduce the friction of the workpiece, are mounted on eccentric axles for easy and convenient adjustment of the protrusion above its level.
Powerful (more than 5 kilowatts) motor, high rigidity and a four-blade cutterhead provide clean, confident and productive work in any breed.
Compared to lighter models, this machine is relatively quiet.
The workpiece is fed by different types of shafts: the first is metal with notches (“ribbon”), the second is smooth rubber.
Drive mechanism with two gears for speed selection (7 or 10 m/min).
The machine can be equipped with a helical shaft (optional). With it, the quality of planing is higher, and maintenance and operation are easier: there is no need for sharpening and adjusting knives, noise and vibrations are significantly reduced, areas of wood with knots and the reverse direction of the fibers are processed without defects.
Peculiarities:
Possibility of installing a helical cutterhead
2-stage feed rate adjustment
Thickness table with rollers
Planing height adjustment by rotating handwheel
Gear table height adjustment
Removable roller infeed and outfeed tables
Cast iron body
Characteristics:
Power consumption, kW 5.5
Voltage, V 400
Consumed (output) power of the main engine, kW 5.5 (3.8)
Planer shaft speed 5000 rpm
Cutterhead diameter 81 mm
Blade size (LxWxT) 510 x 25 x 3 mm
Number of knives 4
Workpiece feed speed 7 and 10 m/min
Maximum workpiece width, mm 500
Maximum workpiece height, mm 200
Maximum planing depth per pass 5.0 mm
Maximum allowable planing depth in one pass over the entire width 2.0 mm
Minimum workpiece length 170 mm
Thickness table length (with extensions) 654 (1470) mm
Exhaust outlet diameter, mm 127
Length, mm 660
Width, mm 930
Height, mm 1050
Weight, kg 300
Packed length, cm 97
Packed height, cm 115.5
Packed weight, kg 359
Equipment:
thicknesser JET JWP-208-3
set of knives (mounted on the shaft)
front and rear roller table extensions
cabinet-stand for floor installation
Manufactured by JPW Tools AG (Switzerland/Taiwan).
Jet is a wide range of machines for working with wood and metal. Most models are addressed to professionals and are intended for use in small workshops and industrial enterprises. But there is also a separate entry-level series for hobbies.
We recommend to buy, we will deliver all over Russia.
How to buy: click the "add to cart" button. In the shopping cart, click "Checkout" and fill in your contact details, your payment and delivery options. Within a working day after receiving your order, the manager of "Arsenal Master" will call you, approve and agree on all the details of the execution of the order. You can also place an order by calling 8-800-7000-462 (call within Russia is free) or by email [email protected]
View in the catalog with prices
Buy:
Safety precautions:
Read the user manual. Read the user manual carefully before using the machine. Understand the limitations and dangers associated with the operation of the machine.
Installation. If the machine is installed on the floor, use anchor bolts High Quality. There are mounting holes for anchor bolts on the base of the machine. If the machine is mounted on a movable base, make sure the wheels are locked.
Eye protection. Wear goggles or a shield to protect your eyes. (NOTE: regular goggles are only impact resistant, not safety goggles.) Also use a face shield or respirator if planing is accompanied by high dust emission.
Dress. Do not wear loose clothing, ties, jewelry, or gloves. These things can get caught in the moving parts of the machine. Hide your long hair. Roll up your sleeves above your elbows.
Machine location. Locate the machine so that the kickback zone is not in line with walkways, doorways, flushing units, and other work areas. Do not operate the machine in wet or damp areas, do not expose to rain. Maintain good lighting in the work area.
Electrical grounding. Make sure the machine bed is grounded and there is a ground wire in the internal wiring. If using a cable and plug, make sure that the plug with a grounding pin is connected to a suitable ground. Follow the grounding procedure in the electrical code.
Protective barriers. Make sure the safety barriers are in good working order and in place. Do not operate the machine with the gearbox cover open. If barriers need to be removed for Maintenance or machine settings, they must be replaced immediately upon completion of work. Do not operate machine with guards removed.
Machine maintenance. Before switching on, remove all optional equipment such as wedges, wrenches, waste products, and cleaning cloths. Keep the floor around the machine clean, and remove discarded workpieces and sawdust to minimize the risk of slipping.
Power off. When performing maintenance or repair, make sure the machine is unplugged or the machine is unplugged and locked out.
Planer shaft. Keep your knives sharp and free of rust and wood resin. Make sure the adjustment wedge screws are tight.
blank. Check the material for loose knots, nails or other imperfections that could damage the blades or pose a risk of injury to the operator. Do not touch the feed, unload and cutterhead rollers while the machine is in operation. Use a suitable extension cable. Make sure the extension cable is in good condition. When using an extension cable, make sure that the cable size is suitable for the amperage the machine is drawing. An undersized cable will result in line voltage drop, power loss and overheating.
Drugs, alcohol, medicines. Do not operate the machine under the influence of drugs, alcohol or any medication.
If you are unfamiliar with thicknesser work, seek advice from your mentor, instructor, or other qualified person.
Harmful production conditions. Dust generated during grinding, sawing, sharpening, drilling and other shaping operations contains chemicals that cause cancer, birth defects and other reproductive diseases. Some sample data chemical substances: . Lead from lead-based dyes. . Crystalline silica from bricks and cement, as well as other building industry products. . Arsenic and chromium from chemically treated lumber. The risk of exposure to these substances depends on how often you work with them. To reduce your exposure to harmful substances, work in a well-ventilated area and use protective equipment such as respirators that are specially designed to trap microscopic particles.
Video:
JET thicknessing machines model JWP-208 article 708584T belong to industrial class machines and are used for calibrating wood products, namely: timber, boards, as well as various blanks to the required size.
The JET JWP-208 thicknessing machine is a stable design in which all elements are made of cast iron: bed, work table and planer head elements, which reduces vibration during operation and prolongs the service life of the machine. Therefore, the operation of the machine is safe and convenient. The height of the table during the work of the worker is regulated by a large flywheel. Without much physical effort, you can easily lower and raise the table, depending on the thickness of the workpiece to be processed.
The JWP-208 model has a two-speed gearbox, which makes it possible to select the speed required for work - 7 or 10 m/min. Wood is processed to a width of up to 500 mm and a height of up to 200 mm. Two rollers are located on the surface of the table, during the rotation of which friction is reduced when the part passes through the machine. In the JWP-208 model, a powerful electric motor is 7.2 kW. You can buy the JET model in the dealer network of the company, throughout the country in the representative offices of the corporation. Turning to the dealer you will be given all the certificates and advice on the operation of JET machines article 708584T model JWP-208. You can get more detailed information in the offices and on the company's website.
