Roller clamp for the four-sided machine s26 2n. General technical data

Four-sided planer C 26-2H, From 26-5 designed for profile and planar processing of lumber ( floorboard, lining, platbands, timber, plinth and other shaped products). At the request of the customer, the C 26-2H machine is equipped with a molding support (C26-5) for profiling when shaped milling cutters are installed on its spindle or for dividing work when processing products up to 55 mm thick when mounted on a circular saw spindle. Machine bed C 26-2H, From 26-5 solid, cast iron, box-shaped. All calipers, drive and feed mechanism are installed on the bed. In the upper part of the plane of the bed, steel overhead tables are attached, guiding the rulers along which the workpieces move. There is also a side clamp. The stepless regulation of the feed rate is carried out by a variator. The workpiece is fed by two upper and two lower drive rolls with oblique corrugation, which allows processing both dry and green workpieces. Machine S 26-2N, From 26-5 has four working spindles arranged in the following order: lower horizontal, right vertical, left vertical, upper horizontal. Let's make delivery of spare parts by the individual order.

Specifications S 26-2N, S 26-5:

Please note: we sell and buy used machines. Not only the equipment listed below is available, but also much more. For more detailed information contact.

Quadruple machine С26-2Н designed for profile and planar processing of lumber floorboards, lining, platbands, bars, plinth and other shaped products.

Machine bed С26-2Н solid, cast iron, box-shaped. All calipers, drive and feed mechanism are installed on the frame. The upper part of the plane of the machine is fixed with steel overhead tables, guiding rulers along which the workpieces move. There is also a side clamp.

Stepless regulation of the feed rate is carried out by a variator and a gearbox.

The workpiece is fed by two upper and two lower drive rolls with oblique corrugation, which allows processing both dry and wet workpieces.

Machine С26-2Н has four working spindles arranged in the following order: lower horizontal, right vertical, left vertical, upper horizontal.

Specifications S26-2N:

Item 5821:

Country of origin: Russia.
Location: Tver region.
Price on request.

Item 6051:

Condition: in working condition, mothballed.
Country of origin: Russia.
Location: Tambov region.
Price on request.

Position 6921:

Condition: very good, working.
Country of origin: Russia.
Location: Samara region.
Price on request.

Item 7911:

In a set: mills, the bunker accumulative for sawdust; hood.

Year of release: 1993.
Condition: very good, working.
Country of origin: Russia.
Location: Vologda region.
Price on request.

Item 8611:

Included: cutters.

Year of release: 1997.
Condition: in full working order.
Country of origin: Russia.
Location: Vladimir region.
Price on request.

Position 9911:

Year of release: 2006.
Condition: in good working condition, mothballed.
Country of origin: Russia.
Location: Krasnodar Territory.
Price on request.

Model 4-sided С26-5 (5 spindle version of the well-known machine С26-2Н)

Excellent condition. Machine 1996 The office from where I dismantled it went bankrupt in 2006, since then it has been in the shop. Dusty but great machine. It is necessary to wash, lubricate and will plow for another 100 years.

1. Workpiece width
- maximum 250 mm
- minimum 50 mm
2. Workpiece thickness
- maximum 125 mm
- minimum 12 mm
3. Minimum workpiece length 630mm
4. Diameter of cutters 180 mm
5. Feeding speed (stepless) of workpiece 7.5-42 m/min
6. Number of spindles 5 pcs. (with molding spindle)
7. dimensions machine without packaging
- length 2925 mm
- width 1350 mm
- height 1512 mm
8. The mass of the machine is 3605 kg.
9. Spindle diameters
- vertical 40 mm
- horizontal 50 mm
10. Number of electric motors on the machine 6
11. Electric motors for driving the lower, right and left calipers, power 5.5 kW.
12. Upper caliper drive motor, power 7.5 kW.
13. Electric motor drive power supply, 3.0 kW.
14. Spindle speed 6000 rpm.
Second-hand four-sided machines mod. S26-5 are designed for profile and planar processing of lumber of any quality, any moisture content from four sides, in order to obtain a floorboard, lining, trim, bars, plinth and other shaped products.
The machine bed S26-5 / S26-2N is solid, cast iron, box-shaped. All calipers, drive and feed mechanism are installed on the frame. In the upper part of the plane of the bed, steel overhead tables are attached, guiding the rulers along which the workpieces move. There is also a side clamp. The stepless regulation of the feed rate is carried out by a variator. The workpiece is fed by two upper and two lower drive rolls with oblique corrugation, which allows processing both dry and green workpieces. The machine has five working spindles.
Distinctive features:
Increased feed rate up to 40 m/min, continuously adjustable by variator;
Powerful frame and body parts cast from cast iron reliably absorb vibration, which allows to obtain high quality products;
Upper lower corrugated driven rollers reliably feed even low-quality and raw workpieces into the processing zone;
Increased power allows you to remove material up to 10 mm thick;
Reliability and simplicity of design allows the machine to be operated in the most difficult conditions by low-skilled personnel;
Operating experience has shown the possibility of using in unprepared premises and even under a canopy.

The machine comes with one drum for three knives and a tool for displaying knives.
If you decide to bargain - write in the comments at least a nickname.

Designed for the production of lining, floorboards, planed timber, trim, plinth and other shaped moldings from edged boards or timber in industrial volumes up to 2.0 m3/hour.
The workpiece is processed simultaneously from four sides with a constant mechanical feed.

Design features of the four-sided machine S26-2N:

The main components of the machine: cast-iron bed, four calipers (two horizontal and two vertical), feed mechanism, claw protection, control panel and clamping system.
The workpiece to be processed is fed by a mechanism with lower and upper drive rollers with oblique corrugation. This ensures reliable advancement of the workpiece of any moisture content with pressure against the base guide. The feed rate can be varied in a wide range (10-40 m/min) due to the variator. The design of the machine provides a quick changeover of cutters to a given size. Claw protection eliminates the possibility of a reverse ejection of the workpiece. All milling cutters have protective covers, which at the same time are chip collectors with nozzles for connecting to dust collecting units.

Technical characteristics of the four-sided machine S26-2N: