Most modern TVs are no longer just repeaters of analog or digital television, they have such features as Smart TV, communication via Skype and much more. But most of the new features that have appeared are based on one paramount one - access from the TV to the Internet. It is thanks to Internet access that you can fully use Smart TV, watch movies from the Internet, chat on Skype, add and use other TV functions. How to set up Internet on TV, a paramount task that arises immediately after its purchase. In this article, I will show in detail how to connect a TV (suitable for any TV - LG, Philips, Samsung, Sony, etc.) to the Internet using a LAN cable.
Almost all modern TVs have functionality that allows them to access the Internet. It remains only to connect and configure it. There are two ways to connect your TV to the Internet:
1 With network cable;
2 Using wireless connection WiFi.
Connecting a cable to a TV is not as easy as it might seem at first glance, because you need to understand where this cable comes from, where one of its ends is connected. And here there are two options:
1 The network cable is connected to the router;
2 The network cable comes from the entrance (provider's cable).
Let's analyze each of the options in more detail.
Connecting the TV to the Internet with an ISP network cable.
This method does not require any additional devices and at first it may seem that everything is simple, but this is not entirely true. The thing is that providers use various connection technologies, such as PPPoE, L2TP, Dynamic IP, Static IP. It is on what technology your provider uses that the settings that need to be made on the TV in order for the Internet to work there depend. You can find out what technology your provider uses by looking at the contract with the provider or by calling technical support. Next, I propose to disassemble each of the connection technologies:
Dynamic IP. If your ISP uses Dynamic IP, you need a minimum of effort:
1 Connect the network cable of the provider to the TV;
2 Make sure your TV is set to Automatic search for network settings.
For example, I will describe how to do this on LG TVs with webOS.
Press the "Settings" button on the normal remote control.
If you have a remote magic, press the "Input" button.
Select the gear icon.
Then select "Network" - " Wired connection Ethernet". There you should see the inscription "Connected to the Internet", if so, then congratulations, you have set up the Internet on the TV.
If you have the message " No connection to the Internet via Ethernet", select this connection and make sure that automatic network settings are set there.
Static IP. With this connection method, you need to find out your network settings from the contract with the provider and register them in the TV settings. We do everything step by step:
1 Connect the provider's network cable to the TV's LAN port.
2 Go to the TV settings and write down the network settings of the provider.
For example, on LG TVs, press the "Settings" button, select from the menu - "Network" - "Wired Ethernet Connection",
Uncheck "Automatically" and write down the IP address, mask, gateway, DNS issued by the provider.
PPPoE, L2TP. Unfortunately, very few TVs allow you to set up the Internet if your provider provides the Internet using PPPoE, L2TP technologies. And for most, the way out of this situation is to use a router to connect the TV to the Internet.
Setting up the Internet on the TV when connected via a router.
For this method, it is necessary that the Internet is already configured on the router (you can find how to configure the router in other articles on our website). Connect one end of the cable to any LAN port on the router.
The other end of the cable to the TV.
Go to your TV settings. On LG TVs, for this, on a conventional remote control, press the "Settings" button
or "Input" button on the remote magic
and select the gear icon.
Go to the "Network" - "Wired Ethernet" menu and make sure that "Connected to the Internet" is indicated below this inscription.
If this is not the case, check that the TV receives network settings automatically by selecting an Ethernet connection. Click the "Edit" button.
And check the "Automatic" box.
Thus, without much effort, using a LAN network cable, you can set up the Internet on any TV (LG, Philips, Samsung, Sony, etc.).
Video connecting TV to the Internet using LAN, Wi-Fi.
Today, more and more people, instead of old TVs, are buying modern Samsung Smart TVs with Internet access by changing wifi settings. In fact, attaching such a device is simple, but we suggest reading detailed instructions so that you don't have any trouble connecting.
Today, more and more people are buying modern Samsung Smart TVs with Internet access instead of old TVs.Articles like this are useful because users find important information in one place with step-by-step instructions. By the way, many people on computer forums ask questions about how to properly connect a TV to the Internet, but do not find an answer. We decided to help, to begin with, there are several connection options.
In the first case, you need to purchase a network adapter for the TV, and in the second - Ethernet
cable for direct connection. In the second case, you just need to plug the cable from the provider into the appropriate TV port. Let's consider the option of wireless connection using a router, since this method allows you to control your home network through a TV.
Using the adapter, you can also connect the cable via Wi-Fi. Today we will look at the topic of how to connect a router to a Samsung Smart TV. If you prefer to use a network cable, then it is better to stock up on special pliers for crimping the connector and. Pressing both independently and with the help of specialists. We have devoted another article to this topic.
What should be done before setting up the TV?
If you have purchased a TV with wifi, please read this section carefully. Often, users believe that the Wi-Fi network is not a reliable connection, because the connection is interrupted, the signal drops out or deteriorates. These indicators depend solely on the quality and reliability of the router and connection speed.
When buying equipment, carefully read specifications, processor capabilities, etc.
Before setting up your Samsung TV, follow these steps:
- check if the TV has a built-in Wi-Fi adapter. If you don't have one, you need to purchase a portable USB router that provides an Internet connection.
Remember, there is appropriate equipment for each TV model. Therefore, when choosing an adapter, consider the manufacturer and version.
Check if the TV has a built-in Wi-Fi adapter. If you don't have one, you'll need to purchase a portable USB router.- Next, let's move on to configuring the router. As soon as you have connected the device, your mobile devices will display an active connection, the Internet is there and everything is working. Individual models have specific parameters to connect a TV with internet and wifi.
How to set up your Samsung Smart TV
As soon as you have installed the device, the TV on the TV is set up automatically. Unfortunately, often the equipment is checked in a store or in a warehouse, carrying out the initial setup. Therefore, when reconnecting at home, this step can be skipped.
If you use a samsung wifi adapter for a TV instead of twisted pair, the device will automatically search for wireless networks. The user takes into account the signal level and connects the TV to a suitable network.
- when the samsung smart tv is plugged in, the main menu will appear. From there, go to the Network section;
- then go to the Network Settings tab. If it’s hard to navigate the TV buttons, use the special button on the “settings” remote control.
- the user on the right will see a small hint that in this section you can set up a network connection and use numerous Internet services;
- After you select Network Settings, a splash screen will appear prompting you to start the setup process. Select the Start button;
- at the next stage, the device requires you to select a specific type of connection: wireless connection or network cable. We need to specify wifi for samsung TV. Click Next and go to the next step;
- now you have to wait 5-10 seconds while the TV searches for available wireless connections, among which is yours.
The TV searches for networks in the 2.4Hz band. In the router settings, you previously specified the SSID - the name of the connection, so finding it is not difficult.
- as more and more users use Wi-Fi routers in cities, several connections will appear in the list that appears at the same time, among which you need to select yours. When you try to connect, the system will display a message asking you to enter a security password.
After specifying a unique password, joining will be performed automatically.
Sometimes the system displays a message about entering the IP, DNS gateway of the Internet. In this case, select the option "receive automatically". After that, all the functions of Smart Smart TV will become available to the user. When the connection is active, the WAN connection icon will appear.
The final step in connecting wifi to the TV is turning on the Smart Hub mode. To do this, go to the Support menu and install the "Smart Hub" function, which provides access to various Internet resources. When activated, you can watch videos in in social networks and visit other pages. To visit the desired site, launch the built-in system browser and enjoy browsing.
What to do if the TV does not connect to the network?
In general, there can be many reasons for not being able to connect to the Internet. but more often, these are incorrect adapter settings. Checking the theory is easy - just try to connect another device, laptop or tablet. If the attempt was successful, then we look further, if not, we dig the router settings.
However, it happens that the TV does not connect, and other devices connect quickly. Let's look at a few reasons for this.
- When you set up a wifi receiver for a TV at the connection stage, go to manual settings. To do this, deactivate the DHCP option in the router settings. After that, manually enter the IP address and gateway in the SMART TV settings. As a rule, you need to enter the address 192.168.1.1, but if you have a TRENDnet device, you will need to enter 192.168.10.1.
For example, let's set the following parameters. IP address: 192.168.1.102, subnet mask: 255.255.255.0, gateway: 192.168.1.1, DNS: 192.168.1.1.
After changing the settings, the device will connect to the network via Wi-Fi and you can use the Internet on the TV.
- After manually adjusting and assigning a unique IP address to the equipment, we recommend re-entering the router settings and assigning a MAC address to a TV or other portable devices, which will save you from entering an IP address the next time you connect to the Internet.
- Try restarting the bluetooth adapter for the TV or the TV itself. To do this, turn them off for 1-2 minutes, and then repeat the setting.
- Sometimes when playing video clips, the image twitches, freezes, or loads intermittently. This indicates insufficient Internet speed. The reason may be a low transfer rate and a weak processor in the router. We recommend expanding the channel and stock up on powerful equipment.
- The quality of the signal depends on the location of the devices. If the router is in another room, then the signal will be much worse, so the pages will load more slowly. Move the equipment closer and the problem is solved.
- If there are WPS buttons on the router and TV, hold them down for 10-15 seconds and try connecting wifi to the TV in automatic mode.
Since you have a wireless network adapter, you can connect your laptop to your TV via wifi. But this is a slightly different topic, which we covered in another article.
WATCH VIDEO
Firmware update via the Internet
Sometimes, if there is no connection, updating the firmware of the TV helps. To do this, connect your Samsung Smart TV to the Internet, go to the menu Support - Software Update. Select the item "On the network", as a result, it will run automatic connection TV to the site with firmware.
When the latest version is installed, the system will display a message stating that the update is not required. Otherwise, the user will be prompted latest version ON. Click OK.
When downloading new firmware and updating, do not turn off the TV.
Or a modem and a wireless network adapter connected to the USB connector of the TV receiver.
You can buy what you need separately retail, online stores. The devices support IEEE 802.11A/B/G and N protocols. Manufacturers recommend the latter protocol. When using B or G, which are much slower, playback may be jerky.
Preliminary remarks
To connect to the network, the TV must communicate with a Wi-Fi access device (modem, router). If it supports the DHCP protocol, then a static IP address and DHCP can be used to connect to Smart TV.
You need to select unused If the frequency is occupied by another nearby device, it will cause interference and lose connection.
Security systems other than those listed below are not supported.
According to the new Wi-Fi certification specifications, modern TVs do not support High bandwidth 802.11N and encryption type WEP, TKIP, or TKIPAES.
If WPS is available, a network connection is made by pressing the PBC button or by entering a PIN code. The SSID and WPA key will be configured automatically.
Without certification, the device cannot be connected to a television receiver.
Wi-Fi connection can be made in the following ways:
- auto-configuration for devices not manufactured by the manufacturer of the TV receiver;
- PBC (WPS);
- auto-configuration using automatic network search;
- manual installation;
- SWL for Samsung devices.
The Wi-Fi adapter may not be recognized or work properly when connected to a third-party hub or USB cable.
Interference elimination
When connected via Wi-Fi, image distortion may occur on some channels. You can fix this by placing the adapter in a location that is not subject to interference:
- via angled USB connection;
- using an extension cord.
In the latter case, the wireless network adapter must be installed in an area where there is no interference from the tuner. Connect to it and to the port Attach to the top rear of the TV receiver case with double-sided tape.
How to connect a TV to Wi-Fi using auto-configuration
The Samsung auto-configuration feature allows you to pair your TV with third-party wireless access points. If they do not support this function, then the connection must be made using PBC (WPS), automatic or manual setup.
Before connecting the TV to Wi-Fi, you must turn off SWL.
Check if a specific device supports a feature automatic configuration, you can visit www.samsung.com.
Configuration using automatic configuration
- Place an access point (AP) and a TV nearby and turn them on. Since download times may vary, you may need to wait about two minutes. Before connecting the TV to the Wi-Fi router, you need to make sure that the network cable is connected to the port of the router. Otherwise, auto-configuration will only certify communication with the access point, and there will be no confirmation of connection to the Internet.
- After a few minutes, connect the adapter to the TV. After that, a pop-up window will appear.
- After connecting, place the router in parallel no further than 25 cm from it.
- You need to wait until the automatic connection occurs. Otherwise, a window with an error message will appear on the screen. To try again, you need to reboot the router, disconnect the adapter, and start again from step 1. You can also choose another connection method: auto, manual, or PBC.
- Put the TD in the right place. If its parameters have changed, or a new access point is being configured, the steps must be repeated from the beginning.
How to connect a TV to Wi-Fi using PBC
If the access point has a PBC button, the procedure is as follows:
- Connect the TV receiver to the Wi-Fi adapter.
- Turn it on, press MENU on the remote control, use the ▲ and ▼ buttons to go to the “Settings” section.
- Select the "Network" menu item.
- Enter the type "Wireless".
- Open the "Network settings" menu item.
- Press the red button on the remote control.
- Within 2 min. hold down the PBC button on the access point. The TV receiver will automatically receive the required settings and a network connection will be established.
- To exit, press the RETURN button.
Automatic network setup
Wi-Fi networks have an additional security system that requires connected devices to transmit a passcode. This is the password (a word or a combination of letters and numbers) entered during connection security setup. Using autoconfiguration requires you to enter a password during the installation process.
To automatically install Wi-Fi Internet, you must:
- Follow steps 1 to 5 of the procedure for connecting to a network using PBC.
- Press the ▼ button to open the Internet Protocol Setting item, and then press ENTER. Switch to "Auto" and confirm the entry.
- Go to "Network Selection" and press ENTER. Searches for available Wi-Fi networks. When completed, a list of them will be displayed.
- In the list, using the navigation buttons, select the desired network and press ENTER. If the router is hidden (invisible), then you need to open the "Add network" menu item and write down the name and password.
- When the Security/PIN window pops up, go to step 6. After the connection screen appears, go to step 10.
- Select Security or PIN. For most home networks, the first option will do. The security screen appears.
- Enter password. It must match the code entered with or modem.
- To do this, you need to know the following:
- Digits are entered using the digital buttons on the remote control;
- moving around the screen is carried out using the navigation buttons;
- the red button changes the case of the on-screen keyboard;
- entering a letter or symbol is confirmed by pressing ENTER;
- deleting the last character is done by the green button on the remote control.
- When finished, press the blue button.
- You need to wait for a message confirming the connection, and press enter. The setup screen will reappear.
- To test the connection, select "Network Test".
Direct connection
It is possible to communicate with a mobile device without the mediation of a router. This feature becomes available when SWL is disabled.
- Direct connection of a new device
- Follow steps 1 to 6 in the setup using PBC (WPS) section.
- Call the list of devices and networks through the menu item "Network selection".
- Press the blue button on the remote control.
- The message “Direct Wi-Fi connection with mobile phone or computer. The network may have limited functionality. Do you want to change your network connection?"
- Enter the SSID and security key on the access point to be connected.
- Direct connection of an existing device
- It is necessary to complete steps 1 to 6 of the setup using PBC (WPS).
- Open the list through the menu item "Select network".
- Enter the desired device.
- If a security key is required, write it down. If the network does not work properly, you should check the login and PIN code. An incorrect key may cause the device to malfunction.
Network settings
If other methods do not work, you must enter the network settings manually. You must first obtain connection data. To do this, on a computer with Windows OS, perform the following actions:
- Right-click on the network icon at the bottom right of the screen.
- Select "Status" from the pop-up menu.
- Go to the "Support" tab.
- After clicking the "Details" button, the network settings will be displayed.
Manual network setup
To enter network connection values manually, you need to perform the following operations:
- Follow steps 1 to 5 for setting up using PBC (WPS).
- Select "Internet protocol settings" and "Manual".
- Go to the input field.
- Enter the IP address using the number buttons on the remote control.
- To move to the next field, press either the other arrow buttons to navigate down, up, and back.
- Enter the subnet mask and gateway.
- Go to the DNS input field. Enter numbers as above.
- When finished, press ▲ to move to network selection.
- After that press ENTER.
- Go to step 4 of the automatic setup and follow the instructions.
SWL connection
This feature allows you to connect modern TVs to an access point that supports PBC. It is possible to establish a connection without a Wi-Fi router.
Before connecting the TV to Wi-Fi, the access point must already be connected to the wireless network.
Normal operation of the adapter is possible only with the USB 1 port. Devices using the 2.4 GHz frequency are supported. The 5 GHz frequency is not applicable.
TV receiver can be connected directly to a PBC-enabled device when SWL is set to "On" and a Wi-Fi adapter is inserted
To connect using SWL, you must perform the following steps:
- Perform steps 1-5 setup with PBC.
- Select SWL and press ENTER to enable it.
- Open "SWL connection".
- If the message "Hold the PBC button of the connected device for 120 seconds" appears, you need to perform the indicated actions. For more detailed information please refer to the instruction manual.
- After connecting the TV to the network, the reference window will automatically close. If the connection fails, try again after 2 minutes.
Possible problems
A Wi-Fi connection may fail if the provider registers the permanent MAC address of the device and checks its authenticity each time to prevent unauthorized access. Because the TV has a different MAC address, the service provider refuses service and the connection fails. To solve this problem, you should contact the provider and find out if you can connect Wi-Fi to the TV. If yes, then you will need to know what action to take.
If the provider asks for a login and password to establish an Internet connection, then before connecting the TV via Wi-Fi, you must enter the required data.
Problems may occur due to the firewall. If so, then you need to contact your ISP.
Sometimes resetting the TV helps. To do this, open the menu item "Support", "Self-diagnosis" and "Reset". After entering the PIN code and agreeing to the terms of the license agreement, the factory settings will be restored.
If the Wi-Fi Internet cannot be connected even after fulfilling the requirements of the service provider, you should contact specialists for help.
Hello dear friends! Time flies very quickly, and new models of TVs are constantly appearing on the shelves of equipment stores. And if you have recently purchased an LCD TV, then you have probably heard that Wi-Fi can be connected to it. Indeed, there is such a possibility. In general, it is worth admitting that the idea of writing today's article was suggested to me by my neighbor, who actually turned to me with a request to help connect his TV to the global Internet, since he is completely far from such things.
In general, we can say that we successfully connected the TV with him, although there was one nuance due to which some difficulties arose during the connections, but in general the procedure is not so complicated as it seems at first glance. Therefore, in this article I will tell you in detail how to connect a TV to the Internet via a wifi router, you will also learn how this process goes in general and what you need to connect it. We will also consider the types of Internet connections for modern TVs. You definitely need to know this so that you have in mind in advance whether it is possible to connect the TV to the global web or not, for example, when buying it.
From the title of today's article, it is clear that a router must be installed in your house or apartment. I already talked about the router in my previous articles, you can look at these articles:
or read this post
If this step is not completed, then you can try to connect the cable to the TV, but this is a topic for another article.
I will show the analysis of the procedure for connecting the Internet to a TV through a wifi router using LG as an example. Be sure that the process is identical for other popular brands - Samsung, Toshiba, Phillips, Sony, etc.
How to connect the TV to the Internet through a wifi router?
So, all modern TVs can be divided into several categories:
1. Models with built-in Wi-Fi. it the best option, since the module is already in the design, that is, you do not need to install optional equipment. On such a TV, connecting to the Internet takes no more than 10 minutes.
2. TV with Wi-Fi adapter connection support. Initially, such TVs cannot connect to a router, but you can buy a separate adapter for them. After that, you will be able to use the wireless connection. Keep in mind that different adapters are available for each model. That is why it is important to carefully study the instructions. Adapters look like this:
TVs without Wi-Fi, but with a wall socket. Older models do not support an external adapter, and there is no built-in module in such TVs. You may find a connector for connecting a cable. Then you can implement the following scheme: connect the TV to a second router that operates in client mode. There is also an alternative option, which involves connecting a cable to a LAN adapter, which can receive Internet via Wi-Fi and distribute it via cable.
I won’t talk about models without a LAN connector and Wi-Fi, although there are some craftsmen who connect the Internet to a TV with an HDMI connector. In this manual, we will consider the option with a TV, where a Wi-Fi module is initially present. I repeat once again that the material will be useful for those who already have a USB adapter.
Important! If you have not yet chosen the right TV for yourself, then when buying, check that the TV has a Smart TV function. With it, using the Internet will be even more convenient, and the built-in Wi-Fi module is definitely taken into account there.
What do you need to connect your TV to the Internet?
We just have to get ready. The main component is a TV with a built-in Wi-Fi adapter or an external USB receiver. If you have the second option, then connect the adapter to the TV in advance. Next, you need to check if the router is working. The device model in this case is not important - it must be working.
If you do not have a router, then perhaps there are open access WiFi networks without a password. Sometimes it is impossible to connect to them due to the fact that filtering by MAC address. That is why it is recommended that you have your own router and access to its settings. Then, if necessary, you can make changes. Everything is ready, then we proceed to the connection process!
How to connect a TV to the Internet through a wifi router: step by step instructions!
When we turn on the TV for the first time, it itself offers us to connect to the Internet. Moreover, the system provides a choice - to do it via cable or via Wi-Fi. Most likely, you ignored this item at the first start, so I will show you how to connect the Internet through the settings. Also, you might not have seen this menu, which means that the TV was turned on without you or even in the store.
We start the TV and open the settings - press the "Settings" button on the remote control.
In the menu that opens, you need to find the "Network" tab, then go to the "Network connection" section. If you have an English version of the menu, then follow the example from the screenshots:
After that, the system will show us a small instruction, I recommend that you read it. After that, click on the "Set up connection" button.
The TV will automatically start searching for available networks and give you the result. In my case, there are two connections available. If you need to enter data for the connection yourself, then select "Manual setup". Here you may have a question, and in what cases such a function may be needed? You need to connect using WPS technology, drive in a static IP address, or connect with a hidden SSID.
Using the virtual keyboard, specify the password, if present. Confirm the entry with the "OK" button. If the password was entered correctly. Then you will see a message stating that you have successfully connected to the Internet. Click "Finish" and move on. Perhaps the system will prompt you to enter DNS and IP, I recommend leaving all indicators on "Automatic" and clicking "Finish". As the reviews of owners of TVs of other brands show, sometimes the system issues a network card - it makes no sense to describe this process, since it does not affect the operation of the wireless connection in any way.
Great, now all the functions of Smart TV are available to you. The screenshot below shows the icon responsible for turning on Smart TV. Also at the top of the screen you can find out if your computer is connected to the wireless Internet.
Possible problems when trying to connect the TV to the Internet through a wifi router
Sometimes when trying to connect to the wireless Internet, errors pop up. They can be corrected as follows:
Disconnect the TV from the network and reconnect it. This is the easiest way, but sometimes it helps to solve difficult problems.
Did not work out? Then you should try resetting Smart Hub settings. We go into this section and go to the "Tools". You will find such a button on the remote control. Next, we need to go to "Settings" and click on the "Reset" button. The TV may ask you to enter the PIN code "0000". Next, you will need to agree to the terms, after which the reinstallation will begin.
If this does not help, then you should try to update everything software TV. You will find this feature in "Support". The system will prompt you to update over the network, but in some cases this cannot be done, because you cannot connect to the Internet. In this case, you need to download the software on the Internet on a computer, and then transfer it to the TV using a USB flash drive. I also suggest you watch the following video:
Well, dear friends, that's actually all that I wanted to tell you today in this article. Concluding today's article - how to connect a TV to the Internet through a wifi router, it will be necessary to note that the process is quite quick and simple. If you have a TV from another manufacturer at home, then I think that you will quickly get used to it with the help of my instructions. Do not forget to write questions in the comments if you encounter any difficulty when setting up a wireless Internet connection. Let's search together possible problems connecting the TV to the Internet.
I will also add that I checked the operation of Smart TV on the TP-Link TL-WR841N router. In addition to the TV, 5 more devices were connected to the router. Real speed was about 2 Mb/s. This indicator was enough for me to fully use the functions of Smart TV. As an example, I can say that I watched YouTube videos in HD format, and there were no noticeable slowdowns in speed.
You can watch movies from video hosting sites, chat in social networks or read news in a browser not only on a computer and smartphone, but also on TV. To do this, the TV must have a built-in Smart TV function or an additional set-top box for it and a stable network connection. We will tell you how to connect your TV directly to the Internet - for this you need an Ethernet cable or router and a Wi-Fi module.
A wired TV connection to the Internet is reliable, but not very convenient. It is necessary to connect the TV to the router with a standard patch cord wire, inserting it into the LAN port on the back of the TV. In order not to pull a new cable, you can use PowerLine adapters - they are plugged into sockets next to 2 devices and allow you to transfer Ethernet data between them over the electrical network.
After you managed to connect the TV to the Internet via cable, set up the connection. Launch the menu on the TV, find the "Network settings" item. Select the connection type - via cable - and run the setup program. The device will receive an IP address, close the menu and check the Internet in a browser or other widget.
By WiFi
Connecting to a TV via Wi-Fi does not limit you to wires, but the speed of the Internet is highly dependent on signal strength. To go online, get busy - the procedure is slightly different on different models. How to connect LG TV to internet:
- in the settings menu, go to the "Network" tab;
- go to "Network connection";
- click on "Configure";
- the system will display a list of available networks, select the one you need;
- enter the password from the router;
- the network will connect, click "Finish".
To enable Wi-Fi on a Samsung TV, follow the same steps with one difference - at the beginning of the setup, select that you need to establish a wireless connection, and not via cable.
Configuration via WPS
If you can't set the correct network settings or don't know the network name and password, try WPS auto setup. In the TV menu, among the network settings, find the item "Connection via WPS", go to it. Within 2 minutes, go to the router and hold down the small button on it with the WPS signature for 10-15 seconds. To establish a connection on the TV, they will ask for a pin code - it is indicated in the instructions for the router or on a sticker on its back.
If the TV does not have built-in Wi-Fi
If the TV has a Wi-Fi module, it is enough to configure it correctly. If there is no built-in Wi-Fi in the device, you can still organize a wireless connection to the network. Buy an external Wi-Fi adapter that plugs into a USB port. When choosing an adapter, be sure to pay attention to compatibility with a specific model of your TV - universal devices do not always allow you to transfer media content.
Another way to set up wireless Internet without built-in Wi-Fi is to connect the TV to a router or repeater. Take a router - even budget models will do - and put it in adapter or bridge mode, connect it with a network cable to the TV's LAN port.
Troubleshooting
If the TV does not connect to the Internet via Wi-Fi, first check the network access through the router from other devices - a computer, a smartphone. If the sites do not open anywhere, the problem is in the router settings. If the problem only appears on the TV, try the following steps to fix it:
- reboot the TV and router by turning it off and on after 2-3 minutes;
- if the router is behind a pair of concrete walls, the connection will break, the speed will decrease - move the router closer to the TV;
- when the connection breaks under load or there is not enough channel speed to watch the video - the reason is as a router, buy a more powerful router.
If all else fails, set the connection parameters manually. Turn off the DHCP function in the router settings, enter the IP address and gateway on the TV. In the IP settings, select manual entry and fill in the IP, DNS, subnet mask fields. If you do not know what values to enter, go to the computer connected to the same network in the network connection information. Rewrite the corresponding parameters in the TV, increasing the last digit in the IP address by a couple of units. At the end, write down the MAC address of the TV in the router settings.
Conclusion
We figured out how to connect television to the Internet. Choose from a wired or wireless connection and connect your appliances. Modern manufacturers have made the process as easy as possible, so complex settings are not required.
