0.1. The document comes into force from the moment of its approval.
0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.4. Periodic check this document produced at intervals not exceeding 3 years.
1. General Provisions
1.1. The position "Quality Engineer" belongs to the category "Professionals".
1.2. Qualifications- leading quality engineer: complete higher education in the relevant field of study (master, specialist). Work experience as a quality engineer of category I - at least 2 years. Category I quality engineer: complete higher education in the relevant field of study (master, specialist); for a master - without requirements for work experience, a specialist - work experience in the profession of an engineer in quality II category - at least 2 years. Category II quality engineer: complete higher education in the relevant field of study (specialist). At least 1 year experience as a Quality Engineer. Quality engineer: complete higher education in the relevant area of training (specialist) without requirements for work experience.
1.3. Knows and applies:
- resolutions, orders, orders, methodical, normative and others guidance materials on product quality management;
- a system of state supervision, interdepartmental and departmental control over product quality;
- methods of planning to improve the quality of products;
- technological processes and modes of production;
- basic technological and design data of manufactured products;
- Standards and technical conditions in force in the industry and at the enterprise;
- types of manufacturing defects, methods of its prevention and elimination;
- the procedure for submitting and considering complaints about the quality of raw materials, materials, semi-finished products, components and finished products;
- requirements to technical documentation raw materials, materials, semi-finished products, components and finished products, systems, methods and means of controlling their quality;
- rules for testing and acceptance of products;
- the procedure for preparing industrial products for certification and attestation, the organization of accounting and the timing of reporting on product quality;
- fundamentals of economics, organization of labor, organization of production and management;
- Fundamentals of labor law.
1.4. The quality engineer is appointed to the position and dismissed by the order of the organization (enterprise/institution).
1.5. The Quality Engineer reports directly to _ _ _ _ _ _ _ _ _ _ .
1.6. The quality engineer directs the work _ _ _ _ _ _ _ _ _ _ .
1.7. Quality Engineer during his absence, replaced by a person appointed in in due course which acquires the relevant rights and is responsible for the proper performance of the duties assigned to it.
2. Description of work, tasks and job responsibilities
2.1. Ensures the fulfillment of tasks to improve the quality of manufacturing products, developed and produced, performed works (services), monitors the activities of the enterprise's divisions to ensure that products comply with the current level of development of science and technology, domestic market requirements, export requirements, etc.
2.2. Participates in the development, improvement and implementation of the quality management system, the creation of standards and norms for quality indicators, monitors their observance.
2.3. Analyzes the necessary information and quality indicators that characterize the products that are developed and produced, takes measures to prevent the release of products that do not meet the established requirements.
2.5. He studies the reasons causing the deterioration of the quality of products (works, services), the release of defects, participates in the development and implementation of measures to eliminate them.
2.6. Prepares conclusions on the conformity of the quality of raw materials, materials, semi-finished products, components supplied to the enterprise with applicable standards, specifications and draws up documents for filing claims with suppliers.
2.7. He studies advanced domestic and international experience in the development and implementation of quality management systems.
2.8. Participates in the creation of enterprise standards for quality management, in the preparation of products for certification and attestation, in the preparation of activities related to the implementation of standards and specifications on the products manufactured by the enterprise, as well as in the development and implementation of the most advanced systems and methods of control, which provide for the mechanization and automation of control operations and the creation of the means necessary for this purpose, including non-destructive testing.
2.9. Participates in the development of methods and instructions for the current quality control of work in the manufacturing process, in testing finished products and the preparation of documents certifying their quality.
2.10. Develops and organizes the implementation of measures based on the results of state supervision, interdepartmental and non-departmental control over the implementation and observance of standards and technical specifications for product quality, preparation of products for certification and attestation.
2.11. Maintains records and prepares reports on the activities of the enterprise in product quality management.
2.12. Knows, understands and applies the current regulatory documents relating to its activities.
2.13. Knows and complies with the requirements of normative acts on labor protection and environment, complies with the norms, methods and techniques for the safe performance of work.
3. Rights
3.1. The quality engineer has the right to take action to prevent and correct any violations or nonconformities.
3.2. The quality engineer has the right to receive all social guarantees provided for by law.
3.3. The quality engineer has the right to demand assistance in the performance of his official duties and exercise of rights.
3.4. The quality engineer has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.
3.5. The quality engineer has the right to get acquainted with the draft documents relating to his activities.
3.6. The quality engineer has the right to request and receive documents, materials and information necessary for the performance of his duties and orders of the management.
3.7. The quality engineer has the right to improve his professional qualifications.
3.8. The quality engineer has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.
3.9. The quality engineer has the right to get acquainted with the documents that define the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.
4. Responsibility
4.1. The quality engineer is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.
4.2. The quality engineer is responsible for non-compliance with the rules of the internal work schedule, labor protection, safety measures, industrial sanitation and fire protection.
4.3. The quality engineer is responsible for disclosing information about the organization (enterprise/institution) that is a trade secret.
4.4. The quality engineer is responsible for non-fulfillment or improper fulfillment of the requirements of internal normative documents organizations (enterprises/institutions) and legal orders of management.
4.5. The quality engineer is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.
4.6. The quality engineer is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.
4.7. The quality engineer is responsible for the misuse of the granted official powers, as well as their use for personal purposes.
Type sample
I approve
________________________
______ (Surname, initials)
(name of company, ________________________
enterprise, etc., his (director or other
legal form) official,
authorized
approve official
instructions)
"" ____________ 20__
Job description
quality engineer
______________________________________________
(name of organization, enterprise, etc.)
"" ____________ 20__ N__________
This job description has been developed and approved for
basis employment contract With __________________________________________
(name of the position of the person for whom
______________________________________________________ and in accordance with
this job description has been drawn up)
provisions Labor Code Russian Federation and other regulatory
acts regulating labor relations in the Russian Federation.
I. General provisions
1.1. The quality engineer belongs to the category of specialists.
Hired and fired from her by order of the director of the enterprise
at the request of ___________________________________________________________.
(head of the quality control department, other official
faces)
1.2. A person is appointed to the position of a quality engineer of category I,
position of a quality engineer of category II for at least _______ years.
A person is appointed to the position of a quality engineer of the II category,
having a higher professional (technical) education and work experience in
positions of a quality engineer or other engineering and technical
positions filled by specialists with higher professional
education, not less than ________ years.
A person with a higher qualification is appointed to the position of quality engineer.
vocational (technical) education, without presenting requirements for
work experience, or secondary vocational (technical) education and
at least ________ years of experience as a technician of category I, or
other positions filled by specialists with an average professional
(technical) education, at least _______ years.
1.3. The Quality Engineer reports directly to
________________________________________________________________________.
(head of the quality control department, other official)
1.4. During the absence of a quality engineer (business trip, vacation,
illness, etc.) his official duties are performed by a deputy,
appointed in accordance with the established procedure, which acquires the appropriate
rights and bears full responsibility for their quality and timely
performance.
1.5. In his work, the quality engineer is guided by:
- legislative and regulatory legal documents on issues
work performed; methodological materials according to the relevant
questions;
- the charter of the enterprise;
- labor regulations, orders and instructions
director of the enterprise (direct supervisor);
- this job description.
1.6. The quality engineer must know:
- legislative and normative materials for quality management
products;
- system of state supervision, interdepartmental and
departmental quality control; order of presentation and consideration
claims for the quality of raw materials, components and finished products;
- technological processes and modes of production;
- the main technological and design data of the produced
products;
- current industry and enterprise standards and technical
terms;
- types of manufacturing defects, methods of its prevention and
elimination;
- requirements for technical documentation, raw materials,
materials, semi-finished products, components and finished products,
systems, methods and means of their quality control;
- rules for testing and acceptance of finished products;
- the procedure for preparing industrial products for certification and
attestations;
- organization of accounting, procedure and deadlines for reporting on
product quality;
- fundamentals of economics, organization of production, labor and management;
- the main issues of labor legislation; rules and regulations
labor protection.
II. Functions
The quality engineer is responsible for the following:
2.1. Control over the activities of the departments of the enterprise
ensuring compliance of products, works (services) with the level of development of science and
technology, the requirements of consumers in the domestic market, as well as export
requirements, etc.
2.2. Interaction with representatives various organizations in
the process of performing functional duties.
2.3. The study of advanced domestic and foreign experience in
development and implementation of quality management systems.
2.4. Methodical work on product quality management.
2.5. Submission of established reporting.
2.6. ______________________________________________________________.
III. Job Responsibilities
To perform the assigned functions, the quality engineer must:
3.1. Ensure the implementation of quality improvement tasks
products, work (services) performed, control
over the activities of the enterprise divisions to ensure compliance
products, works (services) to the current level of development of science and technology,
requirements of consumers in the domestic market, as well as export
requirements, etc.
3.2. Participate in the development, improvement and implementation of the system
quality management, creation of standards and norms for quality
indicators and monitor their compliance.
3.3. Analyze information obtained at various stages
production of products, works (services), quality indicators,
characterizing products, works (services), and take measures to
preventing the release of products, the production of works (services) that do not
meeting the established requirements.
3.4. Review and analyze claims for product quality,
services, prepare conclusions and conduct correspondence based on the results of their
consideration.
3.5. To study the reasons causing the deterioration of product quality
(works, services), release of marriage, participate in the development and implementation
measures to eliminate them.
3.6. Prepare conclusions on the conformity of the quality of applicants
for the enterprise of raw materials, materials, semi-finished products, components
standards, specifications, as well as prepare documents for
filing claims with suppliers.
3.7. To study the advanced domestic and overseas experience for the development
and implementation of quality management systems.
3.8. Participate in the creation of enterprise standards for
quality management, product preparation and certification, attestation,
in the preparation of measures for the implementation of standards and technical specifications for
manufactured products, as well as in the development and implementation of the most
perfect systems and methods of control, providing for automation and
mechanization of control operations and the creation of the necessary
means, including means of non-destructive testing.
3.9. Participate in the development of methods and instructions for the current
quality control of work in the process of manufacturing products, in tests
finished products and execution of documents certifying their quality.
3.10. Develop and organize the implementation of activities for
the results of state supervision, interdepartmental and
non-departmental control over the implementation and compliance with standards and
technical specifications for product quality, preparation of products for
certification and attestation.
3.11. Keep records and prepare reports on the activities of the enterprise
for product quality management.
3.12. _____________________________________________________________.
IV. Rights
The quality engineer has the right to:
4.1. Get acquainted with the draft decisions of the company's management,
relating to its activities, to submit to management
suggestions for improving the work related to his duties.
4.2. Receive from the heads of structural divisions,
specialists information and documents on issues included in its
competence.
4.3. Involve specialists from all structural divisions
enterprise to solve the duties assigned to it (if it is
provided for by the provisions on structural divisions, if not - with
permission of the head of the enterprise).
4.4. Require the management of the enterprise to assist in
performance of their duties and rights.
V. Responsibility
The quality engineer is responsible for:
5.1. For failure to perform (improper performance) of their official
duties set out in this job description
within the limits determined by the labor legislation of the Russian Federation.
5.2. For those committed in the course of carrying out their activities
offenses - within the limits determined by administrative, criminal and
civil legislation of the Russian Federation.
5.3. For causing material damage - within the limits determined
labor, criminal and civil legislation of the Russian Federation.
The job description was developed in accordance with ________________
(Name,
_____________________________.
document number and date)
Supervisor structural unit _________________________
(initials, surname)
_________________________
(signature)
"" _____________ 20__
Agreed:
Boss legal department
_____________________________
(initials, surname)
_____________________________
(signature)
"" ________________ 20__
_________________________
I am familiar with the instruction: (initials, surname)
_________________________
(signature)
Rights and obligations of a quality engineer:
The quality engineer is hired and dismissed from the position by the head of the association on the proposal of the head of the quality management and certification department (QMS).
The activities of a quality engineer are aimed at:
Development of administrative and evidentiary documentation to ensure that the activities of the association comply with the licensing requirements and to support the activities of those who have licenses;
Analysis of information on the status of quality management systems and the availability of necessary supplier licenses, including based on the results of supplier QMS audits;
Implementation, together with the divisions of the association, of new principles of quality assurance based on the use of statistical methods in the development, management and verification of the capabilities of technological processes for manufacturing products.
The quality engineer in his work is guided by:
The current legislation of the Russian Federation;
Orders of the Ministry of Industry and Trade of the Russian Federation;
International aerospace standards according to QMS AS/EN 9100;
Aviation regulations, guidelines and directive letters of the Aviation Register;
Programs for the introduction of statistical methods of quality management in JSC "KnAAPO";
Policy of JSC "KnAAPO" in the field of quality;
Guidelines for the QMS;
Regulatory documents of the Federal Agency for Technical Regulation and Metrology;
Orders and orders of the leadership of the association of the head of the OMKS;
Rules of the internal labor regulations of JSC "KnAAPO" and other local regulations;
Regulations on OMKS;
Regulations on BLRP.
The quality engineer must have a higher technical education without presenting requirements for work experience or secondary vocational (technical) education and work experience as a technician of category I for at least 3 years.
A quality engineer of the 2nd category must have a higher technical education and work experience as a quality engineer or in other engineering and technical positions filled by specialists with a higher education for at least 3 years.
The quality engineer is responsible for:
Participate in the development of monthly plans - reports of the work of the bureau and ensure the implementation of the items assigned to it;
Participate in the organization of the work of the bureau in the field of technical regulation, the use of statistical methods, the analysis of suppliers, certification and licensing in accordance with the regulation on the bureau and the work plan;
Participate in the organization of work with executive authorities on licensing, production, modernization, repair of military and dual-use aircraft, industrial and technical products and other activities;
Have the skills to work on a PC at the user level, including computer programs: Word, Excel, Attestor and other necessary programs;
Participate, together with the divisions of the association, in organizing the development of programs for the introduction of statistical methods of product quality management;
Provide methodological assistance in the development of programs for the application and implementation of statistical methods of quality management at the request of the association's divisions;
To study the RD developed by bodies for technical regulation, certification and licensing and prepare documents to bring these documents to the services of the association in the form of orders, instructions and STP;
Develop administrative documentation for the analysis of information on the state of the QMS and the availability of licenses from suppliers;
To analyze, together with responsible specialists for reliability and after-sales service, the quality status of products supplied by various suppliers, in order to prepare measures to improve the quality of products supplied;
Carry out, together with experts from regulatory authorities (in the field of certification), control of the production of certified products, develop, together with the services of the association, measures on proposals from regulatory authorities, draw up reporting documents on their activities;
Conduct verification and preliminary approval of contracts and technical conditions for the supply to the association, intended for the main production of raw materials, materials, semi-finished products, products, as well as for the supply of products to the consumer in terms of harmonization for compliance with the requirements of certification and licensing and verification conditions from the supplier of the current QMS and the release procedure products;
Prepare materials for organizing the participation of the association in competitions and exhibitions related to issues of quality management, certification, the development of new approaches to quality management and the promotion of the best goods, services and technologies in production at the association;
Participate in the organization of audits of the second party of the QMS of JSC "KnAAPO" and suppliers;
Participate in the analysis of contracts drawn up by OMKS;
Participate in organizing the timely implementation of international and national standards, enterprise standards and other regulatory documents for licensing and product certification;
To take part in carrying out inspections by statistical methods of technological processes;
Analyze the documentation received by the Bureau for compliance with the established requirements;
Be competent, i.e. to know and apply in the work of ND and ND associations on QMS, on the application of statistical methods of product quality management, systems for the development and production of military equipment, a unified system of design documentation, a unified system of technological documentation, when solving production issues and interacting with third-party organizations.
The quality engineer has the right to:
Receive from the divisions of the association the information necessary to assess readiness for certification and compliance with licensing requirements;
Require the head of the bureau to provide the necessary reference and regulatory documentation for the performance of work;
Require the head of the approved work plan;
Provide information to the head of the bureau on the state of implementation of plans and programs for certification, licensing, certification of products by departments;
To be directly involved in the work on certification of products;
Advise employees of departments on licensing, product certification, application of statistical methods;
Apply in writing and orally to the head of the department on all production issues of the work.
The quality engineer is responsible for:
Improper performance of the duties assigned to him, approved plans, measures, orders, instructions;
Unsatisfactory quality of the documents developed by him;
Unsatisfactory quality of the analyzed documentation received by the bureau of divisions.
APPROVE
Supervisor _________________________
_______________________ (____________)
JOB DESCRIPTION
quality engineer
1. GENERAL PROVISIONS
1.1. This job description defines the functional duties, rights and responsibilities of a quality engineer (hereinafter referred to as the "engineer") ______________ (hereinafter referred to as the "Company").
1.2. The engineer is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the head of the Company.
1.3. The engineer reports directly to _________________ Society.
1.4. A person is appointed to the position of an engineer who has:
Category I quality engineer: higher professional (technical) education and work experience as a category II quality engineer for at least 3 years.
Category II quality engineer: higher professional (technical) education and work experience as a quality engineer or other engineering and technical positions filled by specialists with higher vocational education, not less than 3 years.
Quality engineer: higher vocational (technical) education without requirements for work experience or secondary vocational (technical) education and at least 3 years of work experience as a technician of category I or other positions occupied by specialists with secondary vocational (technical) education, not less than 5 years.
1.5. The engineer must know:
- resolutions, orders, orders, methodological and regulatory materials on product quality management; a system of state supervision, interdepartmental and departmental control over product quality; technological processes and production modes; basic technological and design data of the manufactured products; standards and technical conditions in force in the industry and at the enterprise; types of manufacturing defects, methods of its prevention and elimination; the procedure for submitting and considering complaints about the quality of raw materials, materials, semi-finished products, components and finished products; requirements for technical documentation, raw materials, semi-finished products, components and finished products, systems, methods and means of controlling their quality; rules for testing and acceptance of products; the procedure for preparing industrial products for certification and attestation; organization of accounting, procedure and deadlines for reporting on product quality; fundamentals of economics, organization of production, labor and management; fundamentals of labor legislation; labor protection rules and regulations.
1.6. During the period of temporary absence of an engineer, his duties are assigned to _________________________.
2. FUNCTIONAL RESPONSIBILITIES
The engineer has the following responsibilities:
Ensures the fulfillment of tasks to improve the quality of products, works (services) performed, monitors the activities of the enterprise's divisions to ensure that products, works (services) comply with the current level of development of science and technology, consumer requirements in the domestic market, as well as export requirements, etc.
Participates in the development, improvement and implementation of the quality management system, the creation of standards and norms for quality indicators, monitors their observance.
Analyzes the information obtained at various stages of the production of products, works (services), quality indicators characterizing the developed and manufactured products, works (services), and takes measures to prevent the release of products, production of works (services) that do not meet the established requirements.
Considers and analyzes claims and complaints about the quality of products, works (services), prepares conclusions and conducts correspondence based on the results of their consideration.
He studies the reasons causing the deterioration of the quality of products (works, services), the release of defects, participates in the development and implementation of measures to eliminate them.
Prepares conclusions on the conformity of the quality of raw materials, semi-finished products, components supplied to the enterprise with standards, specifications and draws up documents for filing claims with suppliers.
Studying advanced domestic and foreign experience in the development and implementation of quality management systems.
Participates in the creation of enterprise standards for quality management, in the preparation of products for certification and attestation, in the preparation of activities related to the implementation of standards and technical specifications for the products manufactured by the enterprise, as well as in the development and implementation of the most advanced systems and control methods, providing automation and mechanization of control operations and the creation of the means necessary for these purposes, including non-destructive testing means.
Participates in the development of methods and instructions for the current quality control of work in the process of manufacturing products, in testing finished products and the preparation of documents certifying their quality.
Develops and organizes the implementation of measures based on the results of state supervision, interdepartmental and non-departmental control over the implementation and observance of standards and technical specifications for product quality, preparation of products for certification and attestation.
Keeps records and prepares reports on the activities of the enterprise for product quality management.
3. RIGHTS
The engineer has the right:
3.1. Request and receive the necessary materials and documents related to the activities of an engineer.
3.2. Enter into relationships with departments of third-party institutions and organizations to resolve operational issues of production activities that are within the competence of the engineer.
3.3. Represent the interests of the enterprise in third-party organizations on issues related to its professional activities.
4. RESPONSIBILITY
The engineer is responsible for:
4.1. Failure to fulfill their functional duties.
4.2. Inaccurate information about the status of the work.
4.3. Failure to comply with orders, orders and instructions of the head of the Company.
4.4. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.
4.5. Failure to comply with labor discipline.
5. WORKING CONDITIONS
5.1. The engineer's work schedule is determined in accordance with the Internal Labor Regulations established by the Company.
5.2. In connection with the production need, the engineer is obliged to go on business trips (including local ones).
6. RIGHT OF SIGNATURE
6.1. To ensure his activities, the engineer is given the right to sign organizational and administrative documents on issues that are part of his functional duties.
Familiarized with the instruction ___________________/_________________/
(signature)
INSTRUCTIONS
QUALITY ENGINEER
|
name of the institution, |
|||
|
organizations |
|||
|
JOB DESCRIPTION |
APPROVE |
||
|
(director; other official, |
|||
|
00.00.0000№ 00 |
authorized to approve |
||
|
quality engineer |
|||
|
job description) |
|||
|
(signature) |
(surname, initials) |
||
|
00.00.0000 |
|||
I. General provisions
1. The quality engineer belongs to the professional category.
2. For the position:
A quality engineer is appointed by a person who has a higher professional (technical) education without presenting requirements for work experience or secondary vocational (technical) education and at least 3 years of work experience in the position of a technician of category I for at least 3 years or other positions occupied by specialists with secondary professional (technical) education, at least 5 years;
Category II quality engineer - a person with a higher professional (technical) education and at least 3 years of work experience as a quality engineer or other engineering and technical positions filled by specialists with higher education;
Category I quality engineer - a person with a higher technical education and work experience as a category II quality engineer for at least 3 years.
3. Appointment and dismissal of a quality engineer
|
is made by order of the director of the enterprise upon presentation |
||
4. The quality engineer must know:
4.1. Decrees, orders, orders, methodological and normative materials on product quality management.
4.2. The system of state supervision, interdepartmental and departmental control over product quality.
4.3. Technological processes and modes of production.
4.4. Basic technological and design data of manufactured products.
4.5. Standards and technical conditions in force in the industry and at the enterprise.
4.6. Types of manufacturing defects, methods of its prevention and elimination.
4.7. The procedure for the presentation and consideration of complaints regarding the quality of raw materials, materials, semi-finished products, components and finished products.
4.8. Requirements for technical documentation, raw materials, semi-finished products, components and finished products, systems, methods and means of controlling their quality.
4.9. Rules for testing and acceptance of products.
4.10. The procedure for preparing industrial products for certification and attestation.
4.11. Organization of accounting, procedure and deadlines for reporting on product quality.
4.12. Fundamentals of economics, organization of production, labor and management.
4.13. Fundamentals of labor legislation.
4.14. Rules and norms of labor protection.
|
4.15. |
|
5. Quality engineer reports directly |
||
6. During the absence of a quality engineer (illness, vacation, business trip, etc.), his duties are performed by a person appointed in the prescribed manner. This person acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.
II. Job Responsibilities
Quality engineer:
1. Ensures the fulfillment of tasks to improve the quality of products, works (services) performed, monitors the activities of the enterprise's divisions to ensure that products, works (services) comply with the current level of development of science and technology, consumer requirements in the domestic market, as well as export requirements and others
2. Participates in the development, improvement and implementation of the quality management system, the creation of standards and norms for quality indicators, monitors their observance.
3. Analyzes information obtained at various stages of production of products, works (services), quality indicators characterizing the developed and manufactured products, works (services) and takes measures to prevent the release of products, production of works, services that do not meet the established requirements.
5. Examines the causes causing deterioration in the quality of products (works, services), causing deterioration in the quality of products, participates in the development of measures to eliminate them.
6. Prepares conclusions on the conformity of the quality of raw materials, semi-finished products, components supplied to the enterprise with standards, specifications and draws up documents for filing claims with suppliers.
7. Studying advanced domestic and foreign experience in the development and implementation of quality management systems.
8. Participates in the creation of enterprise standards for quality management, in the preparation of products for certification and attestation, in the preparation of activities related to the implementation of standards and specifications for the products manufactured by the enterprise, as well as in the development and implementation of the most advanced systems of control methods, providing for the automation and mechanization of control operations and the creation of tools for these purposes, including non-destructive testing tools.
9. Takes part in the development of methods and instructions for the current quality control of work in the process of manufacturing products, in testing finished products and drawing up documents certifying their quality.
10. Develops and organizes the implementation of measures based on the results of state supervision, interdepartmental and departmental control over the implementation and compliance with standards and technical specifications for product quality, preparation of products for certification and attestation.
11. Keeps records and draws up reports on the activities of the enterprise for product quality management.
III. Rights
The quality engineer has the right to:
1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
2. Submit proposals for the management to improve the work related to the duties provided for in this job description.
3. Report to the immediate supervisor about all the shortcomings in the production activities of the enterprise (its structural divisions) identified in the course of the performance of their duties and make proposals for their elimination.
4. Request personally or on behalf of the immediate supervisor from the heads of departments of the enterprise and specialists information and documents necessary for the performance of his duties.
5. To involve specialists from all (individual) structural divisions in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, then with the permission of the management).
6. Require the management of the enterprise to assist in the performance of his duties and rights.
IV. A responsibility
The quality engineer is responsible for:
1. For improper performance or non-performance of their official duties provided for by this job description - to the extent determined by the current labor legislation of the Russian Federation.
2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.
|
Head of structural unit |
||||||
|
(signature) |
(surname, initials) |
|||||
|
00.00.0000 |
||||||
|
AGREED: |
||||||
|
Head of the legal department |
||||||
|
(signature) |
(surname, initials) |
|||||
|
00.00.0000 |
||||||
|
Familiarized with the instructions: |
||||||
|
(signature) |
(surname, initials) |
|||||
|
00.00.0000 |
||||||
The variety of railings is even more amazing than the variety of external structures. They are made from different types materials, they can be wooden, forged, made of modern safe and durable plastic. When choosing a railing, focus on the overall design of the building, as well as on the ease of use, based on individual characteristics people living or visiting the building.
