How to print. Printing on a printer: typical problems and solutions

It happens that after installing the MFP and turning it on, the question arises of how to print text from a computer to a printer. To many, this kind of task may seem trivial, but in reality it is far from being the case. The fact is that in order to print a document on the printer in the necessary way, you need to configure it.

Fortunately, the manufacturers have tried and greatly simplified the process, so that any beginner can cope with this stage completely independently.

detailed instructions

To print a document, you have to use the installation wizard, which, in turn, will prompt you to go through several stages, each of which will require you to specify the necessary values ​​​​of certain parameters. After that, you will be prompted to print a test page, so you can make sure that the coloring matter (ink or toner) does not smear on the surface of the paper and the final result will really satisfy you.

It should be said in advance that in order to solve the problem related to how to print on a printer from a computer, you will need to set such two main device parameters as quality and grayscale. The first setting of the printer is usually set to "standard", but in some cases, when toner or ink runs out to increase the saturation of the text, you will have to change the value to "high".

As for the second parameter, its setting is especially relevant when you need to print a scanned image or text. Thus, both of the described parameters have a positive effect on the clarity of the printed document - in no case do not forget about them, because at the right time they can help you out. Both of these options can be found in the menu bar under a tab called "Home".

As for directly solving the problem of how to print a document on a printer, first open any document and go to the "File" section in the top panel. In the list that opens, click on "Print" and make the settings described below so that the text printed on the computer is printed properly.

In general, to quickly open the print settings window, it is best to use a combination of buttons such as CTRL and P.

• In the window that opens, first of all, specify the page numbers that you want to print - this value is especially important if you have large documents, when only individual pages need to be printed from them. In addition, using this parameter, you can specify a specific range, for example, 5-10.
• If necessary, click on "All" in the same section of options and go to "Enable" to choose to print only even or only odd pages.
• Also be sure to specify the number of copies you want to print.
• Select the print type, which can be single-sided or double-sided.
• Decide on the orientation of the text: landscape or portrait.
• Specify the number of pages to be placed on one sheet. Thanks to this, you can solve the problem of . On one sheet, you can arrange from 1 to 16 pages.
• Decide on the format. Some printer models make it possible to print texts in a format such as A3, but usually either A4 or A5 is used.
• On the "Effects" tab (if you have it), set the background images.
• Set the quality on the Paper/Quality tab. Thanks to this, you can save paint.
• Be sure to check out the Finishing tab as well, where you can set the text orientation.
• In general, as you can see, everything is done very easily and simply. The most important thing is that you imagine the approximate result that you want to achieve. Only in this way can print settings really help you with your current task.

In addition, be sure to use the preview functions to check how the values ​​entered in the settings will affect the final result. In Word files, you can enable this feature using the keyboard shortcut Ctrl+P. Do not neglect such an opportunity, because it is better to spend half a minute to carefully familiarize yourself with the preliminary result than to uselessly waste paper and paint. Thanks to this, you will be able to successfully answer the question of how to type text on a computer and print it.

Black and white and color printing

If your device is color, then take into account that it is capable of supporting two print modes, namely: black and white and color. To use the first mode, first call the print window using one of the methods described above and follow these steps:

• In the window that opens, click on the "Properties" button.
• Find the item that confirms your choice black and white printing and click "OK" to save your changes.
• Use the preview to see the result, after which you can print in the selected mode.

To print in color, please read the following mini-guide:

• Open a window called "Color Management", where you will see that you can change all the color printing values ​​​​that were previously the default."
• Open Color Settings, then go to the Color Management tab. There you can select a color management mode, click on automatic or manual color matching, make manual adjustments to lightness and saturation, and so on.
• To open more advanced settings that will allow you to customize various minute settings, then click on "Professional Settings".
• In the new window, you should go to the option that displays the desired print option. Click on the desired value and click on "OK" to make and save changes.

We hope that after reading the article, the question of how to print documents will become irrelevant for you.

Images from a computer can be printed on a regular printer, just like text documents. The picture usually requires a lot more ink, so I would like to print everything correctly the first time, without errors.

Before printing directly, check a few things to make sure that the computer is ready to print (you can skip these steps if you are sure that everything is ready):

Note! Here (in the "Devices and Printers" window) it is possible to check for errors in the operation of devices. Right-click on the printer you are using and select Troubleshoot. Windows will check the functionality in a few seconds or minutes, then offer options for fixing it (for example, reinstalling the driver from the official website of the developer).

Now use one of the options for printing the picture.

In Windows 10, developers have integrated the standard Print Images application. Its call will be the fastest of all options, although the functionality of the application is minimal. Right click on the image and select "Print". This is the most fast way printing without additional settings. In the middle of the window that opens, a preview of the printed image on a sheet of paper will be shown. which you will print the picture, paper size, image quality, number of copies, page orientation and click "Print".

If paper is loaded in the printer and there is enough ink in the cartridge, the picture will be printed instantly.

Method number 2. Paint

A slightly more complicated way, although any user will understand it:

Method number 3. photoshop

In this instruction, the case with Adobe Photoshop: 2014.2.0 is analyzed. A method for advanced users, because it provides where more species settings:

Now almost all programs that allow you to open or edit a picture on a computer can print them using printers connected to the system. Try the Ctrl + P key combination, and if the print window opens, feel free to “play” with the settings, check the printer is ready and print the cherished images.

Video - How to print to a printer from a computer

Instruction

You can send a page for printing directly in the browser window. Select the "Print" command from the "File" menu or press the key combination Ctrl and [P]. Many browsers (Opera, Internet Explorer, Google Chrome) this command can also be found in the context menu, which becomes available by right-clicking the mouse in the browser window.

This method of printing is not always convenient, since the format of a web page may not match the format of a plain paper sheet. In this case, you can try several options. Select the text fragment on the page that you need, and set the printer to print only the selected fragment in the printer settings (mark the desired item in the printer dialog box with a marker or select the appropriate command from the drop-down menu).

If the site has a link "Print version", click on it. The page will change. Basically, only text will remain, perhaps emoticons will be displayed, but all the images that were on the page will disappear. Set the "Print" command in any way convenient for you. Such a web page is optimized for printing, and the text on paper will be placed correctly.

You can resort to a less convenient method. Select the material on the page and right-click on it. In the context menu, select the "Copy" command, the selected fragment will be placed on the clipboard. Alternative methods are the keyboard shortcut Ctrl and [C] or the "Copy" command in the "Edit" menu.

Launch a text editor such as Microsoft Office Word, create an empty document and right-click in the workspace. Select "Insert" from the drop-down menu. The keyboard shortcut Ctrl and [V] or the "Paste" button on the "Home" tab in the "Clipboard" section will also allow you to paste material from the clipboard into the document.

After that, edit the text as necessary and send it for printing through the "File" menu and the "Print" command. If "quick" buttons are configured, click on the button with the image of the printer on the toolbar.

Related videos

Sources:

• Adobe Acrobat Pro * Adding text using a command

When working at a computer, it is often necessary to print page so that the information is at hand. This may also be important documents, and interesting web pages.

You will need

• a computer;
• Printer;
• paper.

Instruction

Connect to a computer or printer. For the printer to work, printer drivers must be installed. To use the disk that came with it. Make sure the printer is recognized when you connect it operating system computer or . Make sure the cable from the printer to the computer is connected, the printer itself is plugged in, and the indicator light on it is on. You must have a black ink cartridge (if you will be printing page in black and white) or color ink cartridges (if you are going to page in color). Load the desired number of sheets into the dedicated paper tray.

Prepare page to print. If you are using Microsoft Word or another text editor, format the text and give it the look you want. Set the desired font and color

Of course, you have seen on some sites a ban on the use of the right mouse button. This feature primarily fights those who want to steal your content. This measure will not completely protect you from theft, but it will completely protect you from manual copying. Other options .
I do not recommend disabling the right mouse button if you post materials intended for copying on your blog. These can be codes, scripts, recipes, reference materials, and more. A copy ban in this case will turn away visitors from you, and your blog will become less useful for visitors. If plagiarism protection is important to you, then it is better to use adding your url at the end of the copy. Then you will be sure that if someone wants to publish elsewhere on the Internet, copied from you, then the copy-pastor is more likely to share a link to your blog.
This recipe is suitable for any website. You only need to paste the code on all pages of your blog:

AT Blogger add the code to the HTML/Javascript gadget in the Design tab. If you are using one of the latest themes on your blog (Emporio, Contempo, Soho, Notable), then don't forget to activate the visibility of the widget (tick "Visible to all", "Show "HTML/JavaScript" widget").
On the Wordpress add the code to the Text widget.

Author: Ivanova Natalia

2019-03-03

The holiday is approaching - International Women's Day. Let's get ready for it. You can congratulate girls and women in an original way using the postcard services, which will be discussed below.

You can use the same services that we used for.

Ready postcard services

Create a postcard March 8 online

Use the following services to create a postcard from scratch.

1. Canva is a well-known functional photo editor. Here you will find many templates. Registration required.
2. Printclick If you have your own business, you can order a batch of postcards with the logo and contacts of your company. You can also use the princlick postcard generator. Great promotion and inexpensive.
3. Crello is an editor that requires registration. Don't be scared of English language, in the settings you can switch to Russian.
4. Online postcard - for those who have a well-developed imagination, as they will have to create a postcard from scratch.
5. Mumotiki - prepare beautiful picture, and you can add a congratulatory text here. By the way, if you just need to add text to the picture, then you can check out.

I hope that using one of these generators, you will be able to adequately congratulate your ladies on March 8!

Author: Ivanova Natalia

2019-02-17

The content of the article:

Google Plus is shutting down

The Google Plus platform did not live up to the hopes of the developers and will be completely removed on April 2, 2019. Together with it, the albums associated with it in Google Photos will disappear, and authorization on sites with a Google Plus account will become inaccessible. Since February 4, the function of creating Google Plus profiles, channels and pages has become inaccessible. If valuable content was stored on your account, then you can download a backup copy.
Most of the changes will affect bloggers running their blogs on Blogspot. Some G+ widgets, G+ comments, and your Google+ profile will no longer be available. This is stated in the notification in the Blogger admin panel:

Following the announcement of the end of the Google+ API scheduled for March 2019, there will be a number of changes to Blogger's integration with Google+ on February 4th.
Google+ Widgets. The +1 Button, Google+ Followers, and Google+ Badge widgets will no longer be supported in blog designs. All instances of these widgets will be removed from your blog.
Buttons +1. The +1 and G+ buttons will be removed, as well as the "Share to Google+" links below blog posts and in the navigation bar.
Please note that if you are using a custom template that includes Google+ features, it may need to be modified. Seek guidance from the person who provided you with this template.
Google+ Comments. Support for comments using Google+ will be discontinued, and standard Blogger comments will be restored for all blogs that use this feature. Unfortunately, comments posted via Google+ cannot be transferred to Blogger, so they will no longer appear on your blog.

Deleting Google Plus Comments

Unfortunately, the comments that were published in the system will be deleted forever. You can only use the same tool https://takeout.google.com to say backup comments from Google+ to your computer. Only a bootloader is not provided for it, and you can only restore comments manually in a rather crooked way. It's good that I'm in my time on time.

How to replace google plus profile with blogger profile

If you're blogging on Blogspot, it's a good idea to switch back from your Google Plus profile to your Blogger profile now (for those who switched to Google Plus in the past). I recommend doing this right now in order to avoid unforeseen situations that may occur when deleting Google Plus accounts.

How to get your Blogger profile back

This is easy to do in the Blogger admin settings:
Settings –> User Settings –> User Profile – select Blogger here

Save your changes.

Confirm the transition to and enter your name or nickname.

Don't forget to upload an avatar on your Blogger profile.

how to delete google plus profile

If you decide to get rid of your G+ profile once and for all, then go to your Google Plus page –> Settings –> scroll to the bottom of the page –> delete your Google Plus account:

Author: Ivanova Natalia

Today I will tell you what CSS3 is, what it is eaten with, where to look for it, how to write it correctly. I warn you, I will tell from myself, simplified for the general public, as I see it + examples. So, let's start from afar.
CSS is styles that describe the properties of an object. This means that they are in all existing engines, if you cannot find them, then either look in the wrong place, or they really do not exist ( curve site). Where are they usually found? Usually this is the root of the site, the name of the style.css file, although, in principle, the name is not as important as the .css extension if the file with such an extension is a style file.
See also on my blog.

Where to look for them?

The path to the file is attributed in the template between

" />

Blogspot is a little different, where styles are written right in the code, before the tag between

here styles

What do styles look like?

let's look at an example:

#header ( background: #fff; font-size: 13px; line-height: 1.5; font-family: Georgia,"Times New Roman","Bitstream Charter",Times,serif; color: #333; ) .contacts ( position: absolute; top: 20px; right: 10px; )

site header

website site author contacts

You can view the styles on any site, all you need is a browser. Now you can easily recognize them by reading how they look in this article.
As you can see, the styles are written differently. Styles that start with a pound sign have a specific block id in , styles with a dot have a specific block class. Otherwise, the styles will not work. You can come up with whatever names you want, the main thing is that they correspond to the written id and class in html. Style properties must be enclosed in parentheses and followed by a colon ( look at the example above), the parameter is written and closed with a semicolon. It is allowed that in the last property at the end you can not put a semicolon, just a closing bracket.
It happens that CSS is written immediately in a block, without outputting it to a separate file:

site header

CSS on Blogspot

Styles can be written differently, I will explain later because of what. Opening the code, we can see this (look at the styles carefully, and you will see the familiar blogging tags that set the styles):

As you can see, the style property .Header h1 listed separately above. How to understand and find a property? very simple, font there is a parameter header.font, that's what we're looking for. We find it in the "Blog Title" property group for the ".header h1" style, inside 2 properties "header.font" and "header.text.color". Here we are changing them. This is done to speed up the reading of styles by the browser, so it makes fewer requests. After all, the property header.text.color may be repeated elsewhere. There is more below header.shadow.offset.left and others, the meaning in them is the same, I will not repeat.
When they say to search in css (or styles), it means we are looking in blogspot between tags
and usually before the tag
unless of course they are written directly in html (example above, styles in blocks). In other cms, everything is usually placed in a separate file with the .css extension

Author: Ivanova Natalia

2019-02-15

This latest article is written to provide up-to-date information on removing redundant links from Blogspot templates as well as new Blogger themes. As you know, there have been changes in the Blogger codes in 2018, so many code actions need to be done in a new way. Plus, there are new themes that are formed differently. In connection with these changes, we will analyze the topic of deleting links.
You can check your blog for external links on the services https://pr-cy.ru/link_extractor/ and https://seolik.ru/links. Do not forget that you need to check not only the main page of the blog, but also the page of records (posts) and pages (Page). A large number of external links open for indexing hinder .

How to Remove Links from the Old Standard Blogger Template

Using the Simple template as an example.
Such templates give the most inbound links. In my test blog, when installing a simple theme, when checking, 25 external links were found on the main page, of which 14 were indexed.
I remind you that before making changes in the template code, make a backup copy!

1. Remove Blogger Link - https://www.blogger.com/. This link is wrapped in an Attribution widget. In the "Blog Design" tab, it appears as an Attribution gadget and . To remove it, go to the "Theme" tab-> edit HTML. By searching for widgets (list of widgets), we find Attribution1 and delete all the code along with the footer section in which it is enclosed. This is what the removed code looks like in collapsed form:
   
   
   And so the full code:
   

   
   
   
   
   
   
   

   
   
   
   
   

   
   
   
   
   

   We save the changes and check the blog for Attribution.
2. You have certainly seen the “Wrench and Screwdriver” icons on your blog for quick editing of widgets. Each such icon carries with it an external link to Blogger. Now they are closed by the nofollow tag, but you still need to get rid of them. You will edit widgets in the Design tab.
   Here is an incomplete list of links that are encrypted in wrench icons (the blog ID will be yours)
   - HTML1 Widget: http://www.blogger.com/rearrange?blogID=1490203873741752013&widgetType=HTML&widgetId=HTML1&action=editWidget§ionId=header
   - HTML2 widget http://www.blogger.com/rearrange?blogID=1490203873741752013&widgetType=HTML&widgetId=HTML2&action=editWidget§ionId=header
   - Blog archive: http://www.blogger.com/rearrange?blogID=1490203873741752013&widgetType=BlogArchive&widgetId=BlogArchive1&action=editWidget§ionId=main
   - Blog Labels: http://www.blogger.com/rearrange?blogID=1490203873741752013&widgetType=Label&widgetId=Label1&action=editWidget§ionId=main
   - Popular posts: http://www.blogger.com/rearrange?blogID=1490203873741752013&widgetType=PopularPosts&widgetId=PopularPosts2&action=editWidget§ionId=main
   All these links are easy to get rid of. Find the tag in your blog template . It occurs as many times as there are widgets on your blog. Remove all occurrences of a tag .
3. We remove links to quick editing of a blog entry (the “Pencil” icon). Makes it easier to edit posts, but carries the threat as an external link of the form: https://www.blogger.com/post-edit.g?blogID=1490203873741752013&postID=4979812525036427892&from=pencil
   How to delete:
   Method 1. In the Design tab, edit the "Blog Posts" element and uncheck the "Show "Quick Edit"" checkbox.
   Method 2. find the tag in the blog template and delete it. Save your changes and check your blog for the icon and link.
4. Delete Navbar. Search for widgets in the html template of the Navbar1 blog and delete all the code along with the section.

   Namely:
   

   
   
   
   

   
   
   
   
   
   

   Now the Navbar on the blog does not provide indexable external links, but I believe that this is an extra element that does not carry a functional load, and it is better to remove it.
5. Remove external links to images. When images are uploaded to a blog post, a link is automatically embedded in them. To remove such links, you need to edit all blog posts. In the “View” mode and then to the “Link” icon. If the image does not contain an external link, then when you click on the photo in the post editor, the “Link” icon is not active (the icon is not highlighted).
   
   
6. Remove the link to the blog author's profile. Delete the author of the blog under the entry. To do this, find the code trueand write false instead of true. It turns out false
7. Close the link from the “ ” widget from indexing with the nofollow tag. If you use the “profile” widget in your blog, then use a quick widget search in the blog template to find the Profile1 gadget code. You need to edit the widget code, replacing rel='author' with in two places and adding to the two links. You should get something like in the screenshot:

   
   Made using the example of editing a Google Plus profile. As a reminder, Google Plus will be phased out on April 2, 2019. Accordingly, after this date, it will be necessary to make other changes in the code of the “About me” widget.

8. Check for external links on any Blogspot post page that has comments. Find and delete the code in the blog template:
   
   In the Blog Settings along the path Blog Settings -> Other -> Site Feed -> Allow Blog Feed, apply the following settings:
   
   

Remove external links from the new default Blogger template

Using the Notable theme as an example

1. Removing Attribution (link below - Blogger Technologies)
   We find Attribution1 in the widget search blog template (list of widgets) and delete the code along with the section by analogy with the old Blogger template (see above 1).
2. Remove the link from the "Report Abuse" widget. This is the ReportAbuse1 widget. We find in the search for widgets:
   The whole code looks like this:
   

   
   
   
   
   

3. We check the blog post page with comments and remove links by analogy with the old blog templates (see above - point 8).
4. Remove links from blog posts that are embedded in post images (see point 5).

Author: Ivanova Natalia

You need to print text or a photo, but you're using a printer for the first time and don't know where to start. Use simple tips to set up your HP printer to print.

The following video will tell you more about all HP print settings:

If you want to print color pictures or photos, then you should set the settings for their size and quantity in the "Select Layout" menu. Then click "Next" to let the HP printer start printing.

If the printing device has not been previously connected to the computer and you do not know how to set up the printer for printing yourself, then use the following tips.

The correct sequence for installing and setting up the printer for printing

Recent versions of Windows allow you to scan for new hardware connected to your computer and automatically configure your printer to print. But sometimes, after self-tuning, the printer does not print, and the Epson CX4300 MFP does not copy documents. Why does the automatic setting of the computer to print not work and why did the device stop working normally? Try setting up the Epson CX4300 for printing yourself.

If the disk is lost or after a while it simply stops being read, then you should download the drivers from the Epson official website, selecting the desired printer or MFP model from the list, as well as the version and bit depth of the installedWindows.

If you want to download the driver for Epson, but don't know where and how - watch the video:

Drivers for HP, Brother and other printers are downloaded in the same way, you just need to go to the corresponding official website.

1. In the "Installation Wizard" that opens, go through all the setup steps, following the prompts of the system.
2. At the end of the process, try sending your text or photo for printing by following the steps above.

Watch the following video for installation assistance:

Sometimes you may encounter a problem with printing a Brother printer, which previously printed text and photos repeatedly, but after a crash or reinstallation of Windows, the printing device stopped working.

Why Brother refuses to print or no longer copies

To figure out why the printer stopped printing from the computer, you need to consistently eliminate all possible problems.