This job description has been developed and approved in accordance with the provisions Labor Code Russian Federation, Decree of the State Committee for Labor of the USSR and the Presidium of the All-Union Central Council of Trade Unions of October 25, 1974 N 298 / P-22 “On approval of the list of industries, workshops, professions and positions with harmful working conditions, work in which gives the right to additional leave and a shorter working day”, Regulations on payment of additional expenses for medical, social and professional rehabilitation of insured persons who have received health damage due to accidents at work and occupational diseases, approved. Decree of the Government of the Russian Federation of May 15, 2006 N 286, and other regulatory legal acts regulating labor relations.
1. General Provisions
1.1. Machine fitter and automatic lines The 4th category belongs to the category of workers and directly reports to [name of the position of the immediate supervisor].
1.2. A person who has special training without presenting requirements for work experience is accepted for the position of an adjuster of machines and automatic lines of the 4th category.
1.3. The adjuster of machines and automatic lines of the 4th category is accepted and dismissed from work by order [the position of the head of the organization].
1.4. The adjuster of machines and automatic lines of the 4th category must know:
– technology for the production of plastic products on the equipment being adjusted;
- device and principle of operation, rules for the operation of the equipment being adjusted;
- scheme and interaction of all nodes of the automated line;
- the order of adjustment, regulation and disassembly-assembly of units and links of the equipment being adjusted;
- purpose and design of instrumentation;
- plumbing;
- basic information about the parameters of processing parts;
- rules for reading drawings;
- basics of electrical engineering, hydraulics, mechanics;
- methods and techniques for troubleshooting the equipment being adjusted;
— state standards and specifications on the raw materials used and finished plastic products.
2. Job responsibilities
The following duties are assigned to the adjuster of machines and automatic lines of the 4th category:
2.1. Adjustment and regulation of work: blow molding machines for the production of hollow products with a capacity of up to 9 liters without regulating the thickness of the walls of the products during the blowing cycle and without automatic breaking of the flash; presses for hot pressing of simple and medium complexity parts and products made of plastic; single screw extrusion machines of various designs.
2.2. Adjustment and minor repairs of individual units of rotor lines.
2.3. Installation on various injection molding machines of molds of medium complexity, multi-cavity molds with lower and upper ejection systems.
2.4. Changing molds, forming heads and forming tools.
2.5. Testing of new forms, inspection, testing and commissioning.
2.6. Regulation of electrical equipment and devices in the scheme of automatic maintenance of the established temperature regime.
2.7. Trial production of products on well-established equipment, participation in its current repair, elimination of minor defects, cleaning and polishing of working parts.
3. Rights
The adjuster of machines and automatic lines of the 4th category has the right to:
3.1. For all social guarantees provided for by law.
3.2. Require the management of the enterprise to assist in the performance of its professional duties and exercise of rights.
3.3. Require the creation of conditions for the performance of professional duties, including the provision of necessary equipment, inventory, workplace that meets sanitary and hygienic rules and regulations, etc.
3.4. For additional vacation and shortened working hours.
3.5. Payment of additional expenses for medical, social and professional rehabilitation in cases of damage to health due to an accident at work and occupational disease.
3.6. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
3.7. Submit proposals for the management of the enterprise to improve the organization and improve the methods of work performed by it.
3.8. Request personally or on behalf of the immediate supervisor documents, materials, tools, etc. necessary to fulfill their official duties.
3.9. Improve your professional qualifications.
3.10. Other rights provided by labor legislation.
4. Responsibility
The adjuster of machines and automatic lines of the 4th category is responsible for:
4.1. For failure to perform or improper performance of their official duties provided for by this job description - within the limits determined by the current labor legislation of the Russian Federation.
4.2. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation.
4.3. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal, civil legislation of the Russian Federation.
Job description for the adjuster of machines and automatic lines for the production of plastic products of the 4th category
Job Description. Adjustment and regulation of work: blow molding machines for the production of hollow products with a capacity of up to 9 liters without regulating the thickness of the walls of products during the blowing cycle and without automatic breaking of the flash; presses for hot pressing of simple and medium complexity parts and plastic products; single-screw extrusion machines of various designs. Adjustment and minor repairs of individual units of rotary lines. Installation on various injection molding machines with molds of medium complexity, multi-cavity molds with lower and upper ejection systems. Changing molds, forming heads and forming tools. Testing of new forms, inspection, testing and commissioning. Regulation of electrical equipment and devices in the scheme of automatic maintenance of the established temperature regime. Trial production of products on well-established equipment, participation in its current repair, elimination of minor defects, cleaning and polishing of working parts.
Must know: technology for the production of plastic products on the equipment being adjusted; device and principle of operation, rules of operation of the equipment being adjusted; scheme and interaction of all nodes of the automated line; the procedure for adjustment, regulation and disassembly-assembly of units and links of the equipment being adjusted; purpose and design of instrumentation; plumbing; basic information about the parameters of processing parts; rules for reading drawings; fundamentals of electrical engineering, hydraulics, mechanics; methods and techniques for troubleshooting the equipment being adjusted; state standards and specifications for raw materials used and finished plastic products.
§ 151. Adjuster of machines and automatic lines for the production of plastic products of the 5th category
Job Description. Adjustment and regulation of work: blow molding machines for the production of hollow products with a capacity of 9 to 60 liters by regulating the thickness of the walls of products during the blowing cycle and with automatic breakage of flash; presses for hot pressing of complex plastic parts; multi-screw extrusion machines for plasticization, granulation and extrusion of various products. Adjustment of units and units of rotary lines for the production of plastic products. Installation of molds for casting products of complex configuration and large forms requiring complex adjustment, on injection molding machines of various designs. Changing molds, forming heads and forming tools. Testing new molds on various types of machines. Regulation of electrical equipment and thermal automation devices. Trial production of products after setting up the equipment. Participation in the current repair of serviced equipment.
Must know: technology for the manufacture of plastic products; device and principle of operation of the equipment being adjusted; kinematic schemes and interaction of nodes of automated lines; rules for the operation of the equipment being adjusted; the procedure for adjustment, regulation and disassembly-assembly of units and links of the equipment being adjusted; properties and compositions of processed materials; appointment of instrumentation; plumbing; systems of tolerances and landings; quality and roughness parameters; fundamentals of electrical engineering, hydraulics, mechanics; methods and techniques for troubleshooting the operation of the serviced equipment; state standards and specifications for raw materials used and finished plastic products.
§ 152. Adjuster of machines and automatic lines for the production of plastic products of the 6th category
Job Description. Adjustment and regulation of work: blow molding machines for the production of hollow products with a capacity of more than 60 liters by adjusting the thickness of the walls of products using electronic devices and force of locking forms over 45,000 kg; pipe lines of various designs for the production of smooth, corrugated pipes and profiles of various configurations; units, machines and automatic machines of complex design for the manufacture of various types of films and products from them; extrusion machines for the manufacture of products of complex configuration. Installation of injection molds for products with multiple parting planes, large-sized injection molds that require complex adjustment on machines of high power and two-color injection molding machines and forming heads that require complex adjustment on units of various designs. Regulation of the system of automatic control of the temperature of the molding heads and the cooling system. Adjustment and regulation of the pneumatic transport system and other transport units. Testing new molds on various types of machines, fine-tuning molds to the required accuracy. Inspection, testing and commissioning of post-adjustment machines. Participation in all types of repairs of serviced equipment.
Must know: technology for the manufacture of plastic products; device and principle of operation of the equipment being adjusted; kinematic schemes and interaction of all units of automated lines; rules for the operation of the equipment being adjusted; the procedure for adjustment, regulation and disassembly-assembly of units and links of the equipment being adjusted; appointment of instrumentation; ways to troubleshoot the operation of the equipment being adjusted; state standards and specifications for the raw materials used and finished plastic products.
Requires secondary vocational education.
I approve [position, signature, full name of the head or other official authorized to approve the job description] [date, month, year] M.P. and the Presidium of the All-Union Central Council of Trade Unions of October 25, 1974 N 298 / P-22 "On approval of the list of industries, workshops, professions and positions with harmful working conditions, work in which gives the right to additional leave and a shorter working day", Regulations on the payment of additional expenses for medical, social and professional rehabilitation of insured persons who have received damage to their health due to accidents at work and occupational diseases, approved. Decree of the Government of the Russian Federation of May 15, 2006 No.
Forms of documents
Unified Tariff and Qualification Handbook of Works and Professions of Workers (ETKS), 2017 Issue No. 27 ETKS Issue approved by Decree of the Ministry of Labor of the Russian Federation of February 20, 2004 N 20 Section ETKS "Production of polymeric materials and products from them" § 150. Adjuster of machines and automatic lines for the production of products from plastics of the 4th category Characteristics of works.
Attention
Adjustment and regulation of work: blow molding machines for the production of hollow products with a capacity of up to 9 liters without regulating the thickness of the walls of the products during the blowing cycle and without automatic breaking of the flash; presses for hot pressing of simple and medium complexity parts and products made of plastic; single screw extrusion machines of various designs. Adjustment and minor repairs of individual units of rotor lines.
Installation on various injection molding machines of molds of medium complexity, multi-cavity molds with lower and upper ejection systems.
Adjuster of machines and automatic lines for the production of plastic products
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Republic of Belarus. 7.3. For causing material damage - within the limits determined by the current labor, criminal and civil legislation of the Republic of Belarus.
Name of the position of the head structural unit SignatureDeciphering the signature of the Visa I am familiar with the work instructionSignatureDeciphering the signature Date COMMENTS building materials), approved by the Decree of the Ministry of Labor of the Republic of Belarus dated June 1, 1998 N 54.
Comments on the occupation tariff categories in accordance with Article 143 of the Labor Code of the Russian Federation. Based on the above job characteristics and the requirements for professional knowledge and skills, a job description is drawn up for a fitter of machines and automatic lines for the production of plastic products, as well as documents required for interviewing and testing when applying for a job.
When compiling work (job) instructions, pay attention to general provisions and recommendations for this issue of ETKS (see the Introduction section). We draw your attention to the fact that the same and similar names of working professions can be found in different issues of ETKS.
I APPROVE Name of the organization Name of the position of the head of the organization WORKING INSTRUCTIONS Signature Explanation N of the signature Place of compilation Date TO THE EQUIPMENT SERVICE MANUFACTURER IN THE PRODUCTION OF PLASTIC PRODUCTS (5TH DISTRIBUTION) 1. GENERAL PROVISIONS 1. The equipment adjuster in the production of plastic products is hired and dismissed from work by order of the head presentation organizations. 2. The equipment adjuster in the production of plastic products is subject to. 3. In its activities, the equipment adjuster in the production of plastic products is guided by: - the charter of the organization; - rules work schedule; - orders and orders of the head of the organization (direct supervisor); - these operating instructions.
4.
Substitution:
- Adjuster of machines and automatic lines for the production of plastic products of the 5th category replaces…………………………………………………………………………
- The adjuster of machines and automatic lines for the production of plastic products of the 5th category is replaced by …………………………………………………………………….
- Recruitment and dismissal: The fitter of machines and automatic lines for the production of plastic products is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
2.
Position: Adjuster of machines and automatic lines for the production of plastic products of the 5th category Subdivision: 1. General provisions:
- Subordination:
- The adjuster of machines and automatic lines for the production of plastic products of the 5th category is directly subordinate to ……………………
- The adjuster of machines and automatic lines for the production of plastic products of the 5th category follows the instructions of ……………………………………………….
- (instructions of these employees are carried out only if they do not contradict the instructions of the immediate supervisor).
Subdivisions.
- The fitter of machines and automatic lines for the production of plastic products has the right to propose for consideration by the manager proposals for improving the work related to the provisions of this job description responsibilities.
- The adjuster of machines and automatic lines for the production of plastic products has the right to submit proposals for the consideration of the head of the proposal to encourage distinguished workers, to impose penalties on violators of production and labor discipline.
- The adjuster of machines and automatic lines for the production of plastic products has the right to report to the manager on all identified violations and shortcomings in connection with the work performed.
Info
Adjuster of machines and automatic lines for the production of plastic products of the 6th category Characteristics of work. Adjustment and regulation of work: blow molding machines for the production of hollow products with a capacity of more than 60 liters with regulation of the thickness of the walls of products using electronic devices and a mold locking force of more than 45,000 kg; pipe lines of various designs for the production of smooth, corrugated pipes and profiles of various configurations; aggregates, machine tools and automatic machines of complex design for the manufacture different kind films and products from them; extrusion machines for the manufacture of products of complex configuration.
Installation of injection molds for products with several parting planes, large-sized injection molds that require complex setup on machines with high power and two-color injection machines, and mold heads that require complex setup on units of various designs.
Trial production of products after setting up the equipment. Participation in the current repair of serviced equipment.
Should know: the technology of manufacturing plastic products; device and principle of operation of the equipment being adjusted; kinematic schemes and interaction of nodes of automated lines; rules for the operation of the equipment being adjusted; the procedure for adjustment, regulation and disassembly-assembly of units and links of the equipment being adjusted; properties and compositions of processed materials; appointment of instrumentation; plumbing; systems of tolerances and landings; quality and roughness parameters; fundamentals of electrical engineering, hydraulics, mechanics; methods and techniques for troubleshooting the operation of the serviced equipment; state standards and specifications for raw materials used and finished plastic products. § 152.
The adjuster of equipment in the production of plastic products has the right to: 6.1. Require periodic safety briefings.
6.2. Have the necessary instructions, tools, individual funds protection and require the administration to provide them. 6.3. Familiarize yourself with the internal labor regulations and the collective agreement. 6.4.
Make suggestions for improving the technology of work. 6.5. . (other rights, taking into account the specifics of the organization) 4. RESPONSIBILITY 7. The adjuster of equipment in the production of plastic products is responsible for: 7.1.
For non-performance (improper performance) of their work, within the limits determined by the current labor legislation of the Republic of Belarus. 7.2.
Important
The adjuster of equipment in the production of plastic products must know: - the technology of manufacturing products; - device and principle of operation of the equipment; - kinematic diagrams and interaction of all nodes of automated lines; — rules and instructions for the operation of equipment; - the procedure for setting up, regulating and assembling and disassembling units and units of equipment; — properties and compositions of processed materials; — appointment of instrumentation; - plumbing; — system of tolerances and landings; — grades and roughness parameters (accuracy and purity classes); - basics of electrical engineering, hydraulics, mechanics; - methods and techniques for troubleshooting equipment; — standards and specifications for raw materials and products. 2. PROFESSIONAL RESPONSIBILITIES 5. An equipment adjuster in the production of plastic products is instructed to: 5.1.
Job adjuster of machines and automatic lines for the production of plastic products 3 category 3 category vacancies Adjuster of machines and automatic lines for the production of plastic products 3 category 3 category in Moscow. Vacancy adjuster of machines and automatic lines for the production of plastic products 3 category 3 category from direct employer in Moscow job postings as an adjuster of machines and automatic lines for the production of plastic products 3 category 3 category Moscow, vacancies recruitment agencies in Moscow, I am looking for a job as an adjuster of machines and automatic lines for the production of plastic products 3 category 3 category through recruitment agencies and from direct employers, vacancies as an adjuster of machines and automatic lines for the production of plastic products 3 category 3 category with and without work experience work. The site of announcements about part-time jobs and jobs Avito Moscow job vacancies adjuster of machines and automatic lines for the production of plastic products 3rd category 3rd category from direct employers.
Work in Moscow adjuster of machines and automatic lines for the production of plastic products 3 category 3 category
Site job Avito Moscow job fresh vacancies adjuster of machines and automatic lines for the production of plastic products 3rd category 3rd category. On our website you can find high paying job adjuster of machines and automatic lines for the production of plastic products 3 category 3 category. Look for a job as an adjuster of machines and automatic lines for the production of plastic products 3rd category 3rd category in Moscow, view vacancies on our job site - job aggregator in Moscow.
Avito jobs Moscow
Jobs as an adjuster of machines and automatic lines for the production of plastic products 3rd category 3rd category on the site in Moscow, vacancies as an adjuster of machines and automatic lines for the production of plastic products 3rd category 3rd category from direct employers Moscow. Vacancies in Moscow without work experience and highly paid with work experience. Vacancies adjuster of machines and automatic lines for the production of plastic products 3 category 3 category for women.
